How do I deep clean my pool sand filter?

How do I deep clean my pool sand filter?

There are two ways to clean your sand filter: through backwashing, or deep cleaning….

1. Turn Off Your Pool Pump.
2. Set The Valve To “Backwash”
3. Attach Your Backwash Hose.
4. Backwash The Filter.
5. Set The Valve to “Rinse”
6. Finishing Touches.

What is the best way to clean a sand filter?

How to Clean a Sand Filter

1. Backwash the filter for 3-5 minutes to ensure large organic debris is out of the sand.
2. Turn off the pool pump.
3. Remove the lid and basket of the pump.
4. With the pump lid off, turn the pump on.
5. Empty the contents of Filter Cleaner into the pump pot.

How often should you replace the sand in your sand filter?

every 3-5 years
On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.

How to clean and backwash a sand pool filter?

1 Check that your filter’s pressure gauge is 8 to 10 PSI higher than its starting point 2 With your backwash hose connected, turn off the pump, and move the valve to the “Backwash” position 3 Turn on the pump and backwash the filter for 3-5 minutes 4 Turn off the pump, and move the valve back to the “Filter” position

How often should I clean my sand filter?

How to clean your sand filter. The sand in your pool filter should be chemically cleaned at least once a year to ensure proper pool operation. For best results, follow the steps below. a) Backwash filter for 3—5 minutes, rinse for 20 –30 seconds to remove the debris that can be rinsed off.

How can I keep my sand filter running?

In order for your sand filter to run properly, it must be regularly cleaned and maintained. By preparing to backwash the filter, performing a backwash, and giving the filter a final rinse, you can keep your sand filter running smoothly, thus keeping your pool clean. Check your pressure gauges.

Where does the sand come from in a pool filter?

The dirty water coming from the pool enters the inlet pipe of the filter. The filter’s inlet pipe connects to the water distribution head located in the interior of the tank. Simultaneous to this process is the tiny sand particles catching on dirt and other debris as water is rushed down through the sand.

How often should you get a pool filter cleaning?

How Often Should You Clean Your Pool Filters? When to Clean the Filter. The answer to this question can vary depending on the type of filter, but generally, you should clean it once every six months. Cleaning Tips. Utilize these quick tips next time you must clean the filter. Professional Help. When to Replace.

How do you clean sand in pool filter?

The first thing that you should do is to turn off the swimming pool pump. The handle of the sand filter should then be moved to the backwash position then empty the whole bottle of the sand filter cleaner into the skimmer which is located beside the swimming pool. Turn the pump on immediately for some 5-10 seconds.

What is the best sand for a pool filter?

The only sand appropriate for use in pool filters is #20 silica sand, which is .45 -.55mm in size. Do not substitute any other kind of sand; it will not work properly in the filter.

Does my pool filter need new sand?

The sand in your filter should be changed every 2 years on heavily used pools and 5 years on less frequently used pools. If the pool is cloudy and is not related to chemistry it may need early changing.