How do I fix F06 error on Whirlpool dryer?

Whirlpool error F05, F06, F07, F08, or F09

Turn off the dryer and unplug it.
Open the door and take out your laundry.
Wait for about one hour to give the heat time to escape.
Insert the connector into the socket.
Put your laundry back in the drum.
Restart the dryer cycle.

What does e6 mean on a Whirlpool dryer?

Here’s the parts diagram for your model: Whirlpool Dryer WED5600XW0 Repair Parts. F3E6=Moisture Sensor Open F3E6 indicates that the moisture sensor strip is open. This fault code will ONLY appear when in the service diagnostic mode.

What does F06 mean on a Whirlpool dryer?

door lock fault
We believe in a whirlpool dryer error code F06 refers to door lock fault, check the door lock before suspecting anything else.

How do I reset my Whirlpool 6th Sense tumble dryer?

Whirlpool Tumble Dryer Reset Procedure

Turn on the tumble dryer main power.
Within 10 seconds turn the program selector from off to teh 6 o’clock postion, pointing straight down.
Push the “Start” button three times.
Turn the program selector to the “one” position which should be the CW or airing program.

How do I fix F06 error?

How to Fix F06 on a Whirlpool Duet

Touch “Pause/Cancel” twice to cancel the F06 error on the display.
Plug the power cord back in and select a new wash cycle.
Press “Pause/Cancel” twice again if the F06 error code resumes.

What does F6 mean on a Whirlpool washing machine?

Whirlpool , Washers. 6 Answers from these members: The F6 error code for this model indicates a drive motor tachometer error. The control board is unable to properly detect the motor speed.

How do you reset a Whirlpool dryer?

If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.

What does E3 mean on a Whirlpool dryer?

The Whirlpool Duet Dryer E3 Error means either the logic chip in the main control has failed or the user interface or main control board was replaced with the wrong part and is not compatible with that model.

How do I fix error code F06 Indesit washing machine?

Indesit error F06

Check if there’s any laundry in the door.
Put the laundry all the way in the drum.
Close the door and restart the washing machine.

Is there a reset button on Whirlpool dryers?

Whirlpool dryers can do many things, such as monitor moisture levels and temperature, reduce noise, periodically tumble clothes to remove wrinkles, steam clothes and adjust the overall drying time according to fabric and load size. However, one thing a Whirlpool dryer cannot do is reset itself by pushing a button.

What does F06 error mean?

F06 — Door lock fault. Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start. Advice: If your washing machines door will not close, please check for any obstructions in the door lock.