How do I hook up my old home theater system?
How do I hook up my old home theater system?
Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.
How do I connect my old home theater to my phone?
Android devices with NFC:
- Enable the NFC settings on your mobile device.
- Tap on the Music Center icon to launch Music Center.
- Tap the + (Add Device) button, then select Connect by NFC.
- Touch the NFC mark on your mobile device to the NFC mark on your audio device.
How do I connect my 5.1 speakers to my phone?
- Buy an external USB sound card and connect regular analog or digital speakers to that.
- Connect your laptop’s HDMI socket (assuming it has one) to a 5.1 audio receiver.
- Buy a set of home theater 5.1 speakers with bluetooth and have a wireless connection to your laptop.
Can speaker wires be run together?
There’s not a safety issue involved, it’s just a matter of keeping the resistance of the wire small relative to the impedance or the speaker for best sound. [edit] Oh, yes… nothing wrong with running L & R wires together.
How much does it cost to install a sound system?
Sound System Installation Cost Calculator
| National Average | $656 |
|---|---|
| Typical Range | $242 – $1,103 |
| Low End – High End | $99 – $3,100 |
What do I need to install a whole house audio system?
You’ll need a scissors or side-cutting pliers to remove the cable sheathing and trim the wires. Buy a punch-down tool ($4 to $6) to press the wires onto the punch-down blocks (Photo 7).You’ll also need a wire stripper ($12) to remove insulation from the speaker wires.
How to connect speakers to a stereo system?
1 To start, it helps a great deal to draw a picture of what you are connecting. 2 Set up your equipment where you want it to go. Figure out where you want to put your speakers. 3 Connect the audio output from your first source (a CD player, for instance) to an audio input on your receiver with your cables. …
How do you hook up an audio system to a ceiling?
Strip the speaker wires to expose about 3/4 in. of stranded wire and connect them to the speaker. Press the speaker against the ceiling and tighten the screws until the clips are snug to the drywall. Run the Cat-5e cables through the attic, crawlspace or basement to the distribution hub.
Where do I connect the audio cable to my TV?
Connect the two cables to the two Audio out jacks you just located on the back of the TV. Make sure that you connect the red audio cable connector to the red jack and the white audio cable connector to the white jack.
What do you need to set up a home audio system?
Whether you are outfitting a home entertainment system, building a bedside or office headphone listening rig, installing speakers in your kitchen, or realizing your dream flagship stereo system, there is a wealth of excellent and exciting options from which to choose.
What should I add to my home theater system?
Use a pair for a stereo setup or add a few surrounds and a subwoofer for a home theater. A receiver is more than just a hub that connects your system. A good receiver can help ensure you get the best possible sound from your speakers, and get the most from the rest of your gear.
1 To start, it helps a great deal to draw a picture of what you are connecting. 2 Set up your equipment where you want it to go. Figure out where you want to put your speakers. 3 Connect the audio output from your first source (a CD player, for instance) to an audio input on your receiver with your cables.
What makes a good high fidelity audio system?
Building a home high-fidelity (hi-fi) audio system is a balancing act of budget, system performance, user friendliness, aesthetics, and ultimately, the flexibility to refine and evolve the system over time.