How do I know if my rear wheel cylinder is bad?

What Are The Symptoms Of A Faulty Wheel Cylinder?

Your car has poor brake response, and you’ll find that braking takes longer.
Your brake pedal feels mushy, soft or the pedal sinks to the vehicle floor.
There’s a brake fluid leak in your rear brake drum that pools near a rear wheel.
The rear drum brakes drag or lock up.

How do you replace a wheel cylinder on a car?

Replacing a wheel cylinder is usually a simple matter. The wheel and brake drum are removed, the brake line is detached, and the wheel cylinder pistons are retracted from the shoes. Then, the bolts holding the wheel cylinder to the backing plate are removed; allowing the wheel cylinder to be removed.

How to replace a drum brake wheel cylinder?

The wheel brake cylinder is vital to your drums braking capability. In this video I show you the process of replacing the drum brake wheel cylinder. It is easy to do and anyone can do it. It takes about an hour if you take your time. Find inexpensive replacement wheel cylinders here: http://www.amazon.com/s/?_encoding=UT…

What’s the best way to replace a brake wheel?

There is no proven method for completing this step, but the best way is often to use a pair of vice grips. Remove the springs from the brake wheel cylinder to the brake shoes. Refer to your service manual for the exact steps as recommended by your manufacturer. Step 6: Remove rear brake line from wheel cylinder.

How do you know when to replace a brake cylinder?

Check the Wheel Cylinder: To check the wheel cylinder use a flat blade (standard) screwdriver and pull back the rubber cups to check for the presents of brake fluid which is an indication of failure. Some people like to replace the wheel cylinders every time a brake job is done which is the preference of person doing the job.

What’s the best way to replace a wheel cylinder?

This is usually best done with a line wrench as opposed to a pair of vice grips. If you don’t have the right size line wrench, use vice grips. Make sure not to twist the brake line while removing the brake line connection to the wheel cylinder as doing so may break the line.

Do you need to remove brake shoes when replacing Wheel cylinders?

It will help you if you need to replace wheel cylinders but your brake shoes are still good. This technique will save you the trouble of having to remove troublesome springs while you get the brake shoes all dirty. You will however need to readjust the brakes after you install the new wheel cylinder.

How do you replace a brake master cylinder?

Step 12 – Using a sealed container of brake fluid, top off the brake master cylinder with fluid. Step 13 – Once the fluid level has be added to, reinstall and tighten the reservoir cap. Step 14 – Have a helper press the brake pedal down and hold. (Note: Do not pump brake pedal.)