How do I reset my American standard digital thermostat?

Locate the switch for your thermostat in the breaker box. Flip the switch to the OFF position for 20-30 seconds. Return the switch to the ON position. The reboot process will take several minutes to complete.

How do I manually override my thermostat?

Keep the display button depressed and let go of the off button. While still holding the display button, quickly press the up arrow button. Release all depressed buttons at the same time. This should put the thermostat in a manual mode.

Why would thermostat shut off?

Not all thermostats use batteries; many are wired into the electrical system of the house. One of them might have tripped and cut off the power the thermostat. Reset the breaker. If this doesn’t work, then the issue with the thermostat could come from loose connections or other wiring problems.

Where is the reset button on American Standard furnace?

Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.

Why is my American Standard thermostat not working?

Check to see if your thermostat is on, and what temperature it’s set at. If your thermostat is turned off or set incorrectly, turn on and/or reset thermostat. Check your home’s circuits and fuse box. If you have an open circuit breaker or burned-out fuse, switch on the circuit or replace the fuse.

Is there a reset button on a thermostat?

Arrow Buttons – Normally, a thermostat has two arrow buttons for resetting the temperature higher or lower. If you adjust these, the new setting is temporary, only lasting until you have reached the end of the previously set program.

What does the hold button do on a thermostat?

This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.

Where is the reset button located?

Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.