How do I reset my Greenwood Airvac CV2GIP?

Note: To ‘master reset’ press and hold [-/+] buttons simultaneously for approximately 10 seconds until all lights flash to indicate the fan has been reset to factory settings and then revert to both room selection lights at start of commissioning mode.

How do I remove a Greenwood Airvac extractor fan?

Hi David, There is a small round cover in the bottom corner just below the word ‘airvac’. Remove the small round plastic cover and there should be a screw underneath. Remove the screw and the cover should come off.

Why does my extractor fan not turn off?

One common issue with bathroom exhaust fans running non-stop is wiring issues. Sometimes a bathroom exhaust fan has faulty wiring or is not wired correctly. If the circuitry or wiring of the fan were malfunctioning, it is more likely that the fan would not turn on at all.

How do you clean a Greenwood Airvac?

Cleaning Notes: Always isolate from the mains before cleaning. Do not use solvents to clean the fan. Wipe the front grille clean using a damp cloth avoiding getting any water into the internal fan unit. Remove one piece Internal Grille using screwdriver.

How do you open a Greenwood extractor fan?

Make sure that ducting remains circular and screw holes are horizontal. Remove one piece Internal Grille using screwdriver. Push in to free catch then twist to remove grille. Cut an opening through the ceiling for the fan and electrical cable.

Why is my extractor fan constantly running?

If your bathroom extractor fan is running on and on for hours, there is a problem! You really need to get this issue fixed because the wiring could be faulty or the motor could be failing.

Should an extractor fan be on all the time?

Experts agree that you should not leave your bathroom fan on all night. You should only run the fan for about 20 minutes during and after a bath or shower. You especially shouldn’t leave it on at night. If it’s run too long, it can cause serious problems and become a fire hazard.

How do I get rid of Envirovent silent 100?

The cover can be removed by firstly pushing the small reseeded retaining point on one of the edges of the extractor fan, then slowly unclipping the rest of the cover with a small flat screw driver.

Why choose greengreenwood Airvac?

Greenwood Airvac were the first people to re-think the aesthetics of a standard extractor fan when they introduced solid fascias to blend more effectively with modern interiors. They are now challenging convention again with a circular fan which blends in even further, especially in ceilings.

Why choose greengreenwood’s cv2gip?

Greenwood are pioneers when it comes to creating sleek designs for extractor fans, being the first company to implement solid fascias on their designs for seamless blending with their environment. The CV2GIP continues that aesthetic, maintaining a modern look with a circular construction to suit the demands of today’s interiors.

What makes the cv2gip smart?

The CV2GIP utilises Greenwood’s innovative SMART technology to meet modern demands in an intuitive design. The range of technology in the CV2GIP includes automatic humidity sensing, as well as logical overrun timing which helps to reduce both energy waste and heat loss.

What is the product specification of unity cv2gip?

Product Specification. Unity CV2GIP is a dMEV (decentralised Mechanical Extract Ventilation) continuously running extract fan that complies with System 3 in the Building Regulations. Revolving around a one product concept, it is one single unit which can be applied to all wet rooms including kitchen, bathroom, utility and WCs.