How do I reset my high limit hot tub?

The hot tub high limit switch is sometimes triggered when you’re refilling your hot tub and can be reset by pressing the large red button on your spa pack.

How do I clear the HL code on my Arctic spa?

Spa display is reading HL

Turn the power off at the breaker for 15 seconds and then flip it back on. This will reset the HL reading.
You will notice the display show some numbers.
If you see the HL come back within a day or so, this means that there is likely a problem with the probe or the motherboard.

How do I reset my Arctic spa hot tub?

Remove the spa cover and allow water to cool. Once the heater has cooled, reset by pushing any button. If the hot tub does not reset, shut off power to the spa and call your supplier for a service.

What does HL mean on an Arctic spa?

system shut the heater down
HL. When “HL” error message displays, it means the system shut the heater down because temps at the heater reached 119ºF (48ºC). When “HL” error message is flashing, it means the system shut down because the water temps in the spa reached 112ºF (44ºC). In this condition, only Smart Winter Mode will remain active.

What does HL mean on CleverSpa?

a blockage
HL Error Code – What does it mean? An HL error usually means there is a blockage, preventing water from circulating around the pump & heating system.

Is there a HL limit on the Artic spa?

Artic spa HL can’t reset. Empty and refill. HL high limit on Empty and refill. HL high limit on and won’t reset … read more Poolservice123 Owner Associate Degree

Where is high limit sensor on Arctic spa?

You need to open up the control box underneath by the pumps and find the circuit board, look on the circuit board for where the High Limit sensor plugs in then follow that wire back to the sensor and replace. It is most likely on the heater housing. Ask Your Own Pool and Spa Question Customerreply replied 10 years ago

How do you reset the high limit on a spa?

Or it might need a reset from time to time for no known or serious reason. Simply reset by pressing the big red button on your spa pack. The high limit switch may be housed in a thermowell. If the water temperature in the thermowell is the same as the water temperature in the rest of the spa, the switch is damaged and needs to be replaced.

Why does my Arctic spa heater not turn on?

I have an Arctic Spa and the digital display says 'HL', and the heater doesn't seem to be turning on, please – Answered by a verified Pool and Spa Expert We use cookies to give you the best possible experience on our website.

Can you reset the HL on Artic spa?

Artic spa HL can’t reset. Empty and refill. HL high limit on Empty and refill. HL high limit on and won’t reset … read more Poolservice123 Owner Associate Degree 978 satisfied customers I’m trying to find what model Artesian Spa I have. The info I’m trying to find what model Artesian Spa I have. The info is faded out. I do have the SN though.

What does high limit mean on Arctic spa?

Temperatures in excess of 112oF (44.5oC) can cause injury to bathers, as a result the heater and pumps are disabled to prevent further heating of the water. The topside display flashes “HL” on the screen to signal an Over Temperature. If the temperature of the heater barrel is > 119oF (48oC) a High Limit (HL) Error is triggered.

Why do I get error messages on my Arctic spa?

The following hot tub error messages may show up on your arctic spas if there is a potential problem. Follow the recommended action to relive the issue. Temperature probe error. Temperature probe is disconnected from the base board and so the hot tub has no feedback to control the temperature. Contact your supplier. Or a local hot tub technician.

What should water temperature be on Arctic spa?

Over temperature. The water temperature of the spa is > 112oF (44.5oC) High limit. The temperature of the heater barrel is > 119oF (48oC) Flow Switch Open. The flow switch is reading no flow while pump 1 is running. Flow Switch Closed. The flow switch is reading flow while pump 1 is off.