How do I reset my HP LaserJet 9050 password?

How do I reset my HP LaserJet 9050 password?

Press the 9 key three times until COLD RESET is displayed in the control panel. Press the 6 key to select the COLD RESET option. If a bootloader password has been set, a prompt to enter the password will be displayed in the control panel. Input the bootloader password and press the START button to confirm the entry.

How do I reset my HP LaserJet m4555 MFP?

Scroll to and touch the Administration button, and then touch the General Settings button. 2. Touch the Restore Factory Settings button, and then touch an option. Touch the Select All button to reset factory settings for all options.

How do I reset my HP 5820 printer?

Step 4: Reset the printer

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

How do I reset my HP Laserjet 9040dn?

Cold Reset Procedure For HP 9000 9040 9050 M9040 M9050 Series

1. Turn off the printer.
2. Turn on the printer.
3. Wait until the printer begins counting memory.
4. Select and hold TICK (the 6 button on MFPs).
5. Continue to hold TICK until all three control panel lights illuminate, and then release TICK (the 6 button on MFPs).

How do I reset my HP MFP printer?

To restore the product to the factory-default settings, follow these steps.

1. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
2. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
3. Release the Resume button.

How do I perform a hard reset on my HP ScanJet scanner?

Follow the steps below to perform a hard reset on your HP Scanjet Scanner. HP recommends performing a complete scanner hard reset before performing a scanner self test. Power off the scanner.

How do I Reset my HP laptop to factory settings?

It depends. If you can log into HP normally, please use the Settings to factory reset HP laptop. If you can’t access HP laptop, you should complete the reset through Windows Recovery Environment. You should know that if you find the short DST is failed, it means the hard disk cannot pass Disk Self Test due to some problems found on the disk.

How to perform reset to factory default for HPE OfficeConnect 1950?

How to perform a reset to factory default for HPE OfficeConnect 1950. 1. Download image to flash. 2. Select image to boot. 3. Display all files in flash. 4. Delete file from flash. 5. Restore to factory default configuration.

How do I restore my computer to factory settings Windows 10?

Turn on your computer and press the F11 key immediately and repeatedly. Release the key until you see the Choose an option window. Select Troubleshoot and then click Reset this PC. Choose from Cloud download and Local reinstall. (Optional) Choose from Keep my files and Remove everything.