How do I reset my Vokera boiler A04?
How do I reset my Vokera boiler A04?
Vokera Linea fault code 92/93 & 95 The Fix: if the pipe passes to the outside of your property, try to thaw it out with hot water. If necessary, you can even try undoing it at the boiler and drain to a bucket underneath. Press the reset button and watch your boiler fire back to life.
What does vokera Linea fault code 40 / 41 mean?
Vokera Linea fault code 40/41 (Vokera Compact code A04) The Fault: The codes above mean your boiler’s pressure levels are low. Sometimes this can happen if there’s a leak, or if an air bubble has found its way into the system. The Fix: Locate the filling loop underneath your boiler and top up the pressure to 1 – 1.5 bar.
What is the fault code for a vokera boiler?
1. Vokera Linea fault code 92/93 & 95. The Fault: These particular fault codes above indicate that your condensate pipe is either blocked, failing to drain, or frozen. This is particularly common when the condensate pipe runs outside. The Fix: if the pipe passes to the outside of your property, try to thaw it out with hot water.
Why do I get a vokera A03 error code?
Seeing the Vokera A03 error code, likely to be accompanied by the image of a bell, means that your boiler’s fan is faulty. If you’ve had your boiler for some period of time then this suggests that it has worn down over time and needs replacing.
When to say Enough Is Enough with a vokera boiler?
As with any boiler, you have to assess your downtime and costs when thinking about repairs. For instance, if your old Vokera boiler is unreliable and you’re having to take time off work, plus spending £320 on a repair, only for it to break down again a few months down the line, when do you say ‘enough is enough’?
Vokera Linea fault code 40/41 (Vokera Compact code A04) The Fault: The codes above mean your boiler’s pressure levels are low. Sometimes this can happen if there’s a leak, or if an air bubble has found its way into the system. The Fix: Locate the filling loop underneath your boiler and top up the pressure to 1 – 1.5 bar.
1. Vokera Linea fault code 92/93 & 95. The Fault: These particular fault codes above indicate that your condensate pipe is either blocked, failing to drain, or frozen. This is particularly common when the condensate pipe runs outside. The Fix: if the pipe passes to the outside of your property, try to thaw it out with hot water.
Seeing the Vokera A03 error code, likely to be accompanied by the image of a bell, means that your boiler’s fan is faulty. If you’ve had your boiler for some period of time then this suggests that it has worn down over time and needs replacing.
Why is water dripping out of my vokera boiler?
It turned out the boiler now had electrical problems, caused when the connections had been disturbed when replacing the valve. This resulted in water dripping onto the PCB, making the electrics short out. The cost of replacing the PCB wasjust too expensive, and the boiler was then replaced.