How do I reset my Vokera combi boiler?

To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’. Should this reboot get your boiler working again then you’ll know because there will be a constant green light.

Why is my vokera 85 lockout not working?

This can be something has simple has a faulty sensor, a problem with the pump or a main pcb fault. The over temperature sensor isolates the boiler to protect it from overheating, when the burner ignites for example when you turn on your hot tap the burner usually goes into high burn to generate hot water flow.

What to do when pro Combi 85 he lock out?

We have pro combi 85 HE combi boiler which suddenly started going into lock out with solid red light. When this happens the only way to get it working is to turn the main electricity switch off for a while then the boiler will reset and will work for short period of time before it goes to lock out again.

Why does my pro Combi 85 go into high burn?

The over temperature sensor isolates the boiler to protect it from overheating, when the burner ignites for example when you turn on your hot tap the burner usually goes into high burn to generate hot water flow.

What does vokera compact fault code A03 mean?

Vokera Compact fault code A03 The Fault: The above fault code means there’s likely a fault with your boiler’s fan; it may have become worn down over time. The Fix: Test it out with a volt meter; if power levels are correct, it’s definitely time to replace your fan. If there’s no power, check the wiring from the PCB. 5.

What does vokera Linea fault code 40 / 41 mean?

Vokera Linea fault code 40/41 (Vokera Compact code A04) The Fault: The codes above mean your boiler’s pressure levels are low. Sometimes this can happen if there’s a leak, or if an air bubble has found its way into the system. The Fix: Locate the filling loop underneath your boiler and top up the pressure to 1 – 1.5 bar.

What does the fault indicator on a vokera boiler mean?

When the fault indicator (Yellow) is lit it indicates that there is a Servicing operation in progress. The integral time clock (when fitted)can be used to switch the heating on and off at pre-determined intervals. 2.3 LIGHTING THE BOILER Ensure the gas and electrical supply to the boiler are turned on.

How to reset yellow LED service operation vokera?

Refer to instructions on how to reset Yellow LED Service operation DHW TEMPERATURE SELECTOR Move the selector clockwise to increase the hot water outlet temperature, or counter-clockwise to reduce the temperature PRESSURE GAUGE Ensure the system pressure is set correctly (minimum 0.5-bar)