How do I turn on the arc on my Sony receiver?

How do I turn on the arc on my Sony receiver?

How to use the Audio Return Channel (ARC) feature

1. On the receiver remote control, press the Menu or Home button. The menu should appear on the TV screen. If not, check your connections.
2. Select Settings.
3. Press Enter.
4. Select HDMI Control or CTR. HDMI.
5. Press Enter.
6. Select ON or CTRL ON.
7. Press Enter.

How can I Make my Sony TV speaker work?

Press the Home button on the remote control. Select Settings. Select Sound in the TV category. Select Headphone speaker link, then select Speakers on. Select Audio to both TV speakers & other devices, then set to On. If you can fix the headphone output settings, change the settings. For details, refer to the instruction manual of the TV.

What should I do if my audio is not working on my TV?

Turn on the TV and the audio system in the following order: TV first, then the audio system. Change the TV’s Digital Audio Output setting to PCM. If the audio system connected to the TV does not support compressed audio such as DTS or Dolby Digital, depending on the type of broadcast or video, audio may not be output.

How to troubleshoot if there is no sound or…?

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

How can I get sound from my audio system to my TV?

Disconnect the HDMI cable from the TV and audio system, and then reconnect it. On the TV, change the audio output destination setting from TV Speakers to Audio System. NOTE: Just connecting the TV and audio system with a cable will not produce sound from the audio system.

Why does my Sony receiver have low sound?

Run the test tone function (if applicable for your model of A/V receiver). IMPORTANT: Some Sony receivers have a MicroSP setting in the speaker setup which will cause low audio level when not using Micro speakers. Ensure the speaker setting matches the type of speakers connected.

Why is there no sound coming from my AV receiver?

If still sound is not heard after adjusting all these settings, set the Input Mode of the AV receiver to Auto. There is no sound or audio through the speakers when watching television programming . No digital audio when connected with an optical or digital coax cable .

Why do I not get sound from my cable box?

The following are the possible causes for sound not to output when a cable box is connected to an AV receiver and to the TV using an HDMI® cable. If the settings of the cable box is not set correctly. If the cable used to connected the TV and the cable box is not connected properly.

How to troubleshoot low volume or no sound from the TV?

Try setting the A/V receiver to a different surround sound mode. Try changing the TV+AMP setting on the receiver to AMP. Attempt to increase the volume level. Make sure no headphones are connected to the A/V receiver. Replace the speaker wires.