How do you build a raised pond with railway sleepers?

How do you build a raised pond with railway sleepers?

How to build a raised pond with railway sleepers

1. Chose where you want to put the raised pond.
2. Lay the railway sleepers on the ground.
3. Fasten them together.
4. Stack and fix a second layer (if you want the raised pond to be higher)
5. Attach Pond liner.
6. Fill with water.
7. Fill with fish!

Can you put a pond above ground?

Ponds don’t necessarily have to be in the ground. By adopting some of the techniques and materials used in the wood foundation industry, you can build a pond above ground a whole lot faster and easier. An above-ground design may be safer, too, but always supervise small children around any type of pond.

How do I build a small pond?

What to do

1. Choose a spot. Your pond will want light, but not full sunlight all day.
2. If the container isn’t watertight, e.g. an old plant pot, then add a piece of pond liner.
3. Add a layer of gravel and rocks.
4. Fill your pond.
5. Start planting!
6. Now watch and wait!

How do I hide my above ground pond filter?

External pumps and UV lights are probably the hardest to hide. External pumps need to be placed in an efficient location between pond and filters. If necessary they can be placed in a large, in-ground landscape valve box or in a box built specifically for them. Fake rocks of hollow plastic can also be used.

Can you build a pond with wood?

We specialise in timber raised ponds made using very strong interlocking timber boards; our wooden ponds are easy to build without using fixings making a finished pond an afternoon project from start to finish. To watch the construction of this pond please click on the play button in left corner.

Where should a raised pond be placed?

Place a raised pond at the bottom of the garden and you won’t be able to see the fish from the house, nor will you want to cross a muddy lawn to inspect it in autumn and winter. Next is to make sure the site is level.

How long do sleeper ponds last?

Railway sleepers will last for years, with our softwood treated sleepers they can last around 8 to 10 years due to the pressurised treatment, UC4 sleepers extend this to 15 years. Softwood that is left untreated will still last around two to five years.

How do you build an above ground pond?

Add sand about 2 inches layer as per the outline of the pond. The sand will support the initial block on it. Place the blocks for the first layer on the sand by touching the inner top corners. Check each of the blocks is at the place with the required level.

How do you build a retaining wall for a pond?

To strengthen, the boundaries of the pond lay the retaining wall blocks on the top of the concrete building blocks. This action requires where the site has loose soil and sandy. These blocks will help to retain the shape and height of the pond. It is easier to work with the small retaining wall blocks flexibility.

What to put in a raised pond with a railway sleeper?

5) Attach Pond liner. You’ll probably want to first put some carpet or material onto the floor of the pond, to cover any stones or sharp edges. Then attach a pond liner to the inside of the railway sleeper box.

How to make a pond out of blocks?

Pond liner to be placed now inside the pond on felt. Ensure that the coating should completely cover the blocks using 2 feet overlap at the bottom level. Place the flat rocks around the ponds to cover the liner fully, and small gaps will be filled up by the smaller rocks, soil, or dirt for the natural look.

How to build a retaining wall around railroad ties?

Make the area about 5 or 6 inches deeper than the railroad ties so you have room to fill the area behind the tie wall with gravel. This will allow any water coming down the hill to seep into the gravel instead of bulging out your tie wall and eventually making it fall down or move.

Is there a way to build an above ground pond?

If this above-ground pond doesn’t pique your interest, check out all of our backyard pond designs. NO-DIG: With this design, there’s practically none of the worst part of pond building—gut-busting digging. And that also means there’s no huge pile of dirt to get rid of.

How do you make a pond out of a box?

Screw together the wall corners and check to make sure the pond is square before screwing the corners to the footing plates (Photo 4). Then screw or nail the corner backer boards in place. Overlap the top plates to tie the wall corners together. Rip 45-degree corner blocks and tack them to the inside corners to help protect the pond liner.

What happens if you add Gravel to a railroad tie wall?

Take away or add gravel underneath the tie as needed until it is level in both directions. Having the wall out of plumb will also cause the wall to sag, bulge or fall faster.