How do you calculate square footage with multiple sides?

How to Calculate the Square Feet of Odd Shapes

Measure all the dimensions or sides of the area.
Draw the area on graph paper using the measurements you obtained.
Divide the drawing into shapes.
Figure the area of each shape.
Add the areas of all the individual shapes to find the total square footage.

How do you find the area of a 5 sided lot?

I would say your best bet is to get a piece of graph paper and divide the lot up into triangles the best you can, and then use area = 1/2 x base x height to calculate the area of each triangle. This application divides the five-sided polygon into three triangles.

How do you find the square footage of a lot?

Multiply the length by the width and you’ll have the square feet. Here’s a basic formula you can follow: Length (in feet) x width (in feet) = area in sq.

How do I calculate the square footage of a right triangle?

How to find the square footage of a triangle:

Measure the base and height of the triangle (from the base to the highest point of the triangle) in feet.
Multiply these two numbers.
Then divide the total by two and you will have the triangle’s square footage.

How do you find the area with 4 different sides?

The area of any irregular quadrilateral can be calculated by dividing it into triangles. Example: Find the area of a quadrilateral ABCD whose sides are 9 m, 40 m, 28 m and 15 m respectively and the angle between the first two sides is a right angle. The area of the quadrilateral ABCD =(180+126)=306 square meters.

What shape has 4 sides with different lengths?

Rectangle: Like a square, a rectangle has four right angles and two pairs of opposite sides that are parallel. Unlike the square, however, although opposite sides are equal in length, sides that share a corner — adjacent sides — may have different lengths.

What is an irregular figure in math?

An irregular figure is a figure that is not a standard geometric shape. Its area cannot be calculated using any of the standard area formulas. But some irregular figures are made up of two or more standard geometric shapes.

How do you calculate the size of a five sided lot?

Start by using your mouse to drag the points at the corners of the shape shown above. The numbers indicated on the sides represent the length of those respective sides of the property. If you set the sides to their lengths in feet, then use the value in the Acres box.

How to calculate the square feet of a site?

Square feet calculation is straight forward if the sites have fixed length and width .See the example below and we use In the above case we multiply length and width to compute the total square feet. So it will be 50*40=2000 square feet. Now if we have uneven numbers in all four side, How can we get the total square feet.

How to calculate square feet for four unequal sides?

Square feet calculation of four unequal sides. 18:33:00 general 0 Comments. Square feet calculation is straight forward if the sites have fixed length and width .See the example below and we use. In the above case we multiply length and width to compute the total square feet. So it will be 50*40=2000 square feet.

How to calculate area of land in square shape?

Solution, Here in the figure two sides are 14 meter and two side are 8 meter. Hence, in this way we can calculate area of land which are in rectangular shape. now let us calculate area of square plots or land. These types of land are also common in all areas. you will get the shape of land mostly and nearly in rectangular or in square shape.

What is the area of a five sided lot?

I found the length of DB to be 167.59 feet and the length of DA to be 107.47 feet. I then saw the lot as the quadrilateral ABCD and the triangle ADE. The area of the quadrilateral I found using the tool that Steve wrote. The calculated area is 14214 square feet.

How to calculate the size of a four sided lot?

We’ve created a tool (below) that should help you if your property has four sides you can measure. In addition to the four sides, we’ll need to know either a diagonal or the degrees of one of the angles. Note that this tool assumes the shape is convex, not concave. Start by choosing one corner of your property to be corner A.

How do you calculate the square footage of an area?

How to Calculate Square Footage. Calculate the area of each section then add them together for your total. If your measurements are in different units, say feet and inches, you can first convert those values to feet, then multiply them together to get the square footage of the area.