How do you clean a badly stained toilet bowl?

White vinegar and borax/baking soda

Sprinkle baking soda or borax generously on the stained areas.
Use the toilet brush to scrub a little bit and spread the powder around.
Add approximately 1½ cup of white vinegar into the bowl.
Leave the solution to work for 15-30 min.
Rinse.
Repeat if there are still visible stains.

How many minutes the toilet bowl should be soaked in a cleaning solution?

“Be sure to scrub well with the cleaner around the inside of your bowl, the toilet bend if possible, and underneath the rim of the bowl,” she explains. “Then, you’ll want to let everything sit for five minutes, and flush it all away.”

What’s the best way to empty a toilet bowl?

Flush With a 5-Gallon Bucket of Water. Fill a 5-gallon bucket with about 2 or 3 gallons of water and pour the water quickly into the bowl. The large volume of water flowing rapidly into the waste pipe creates a suction that flushes most of the water out of the bowl, and because the tank is empty, no water flows in to replace it.

How can I get germs out of my Toilet Bowl?

Pour a little bit of vinegar into the toilet bowl, one to two cups of white vinegar will do the trick. Feel free to Put on some rubber gloves, although the white vinegar is harmless on our skin, our toilet could contain a lot of germs that can spread diseases.

Is it OK to use baking soda and vinegar to clean toilet bowl?

But if you want to, you can go ahead, as baking soda and vinegar are completely natural and won’t make any damage to your drains. It is also important to mention that this combination is completely environment-friendly and won’t make any damage to the water ecosystem once it goes down the pipes.

Can you use hydrogen peroxide to clean a toilet bowl?

Apply the mixture to the toilet bowl, scrubbing and waiting an hour before flushing. Follow with Coke treatment as needed. For mold, try mixing one part hydrogen peroxide with two parts water in a spray bottle. Spray it onto the moldy surface, let sit at least one hour, and scrub until the mold dissolves.

What do you use to clean a dirty toilet bowl?

However, stains can also be caused by hard water. You can purge your porcelain of hard water rings with your toilet brush and a simple mixture of borax and vinegar. For really stubborn stains, you may want to use a borax and vinegar paste and break out a heavy duty scrub brush.

Do you have to flush the toilet to empty the bowl?

Hold the handle down until all the water has gone from the tank. You must flush the tank only if there is no clogging of the toilet bowl. If there is clogging flushing could result in more problems. If there is clogging you must leave the tank as it is and move to the toilet bowl.

How to remove hard water stains from your toilet bowl?

DRENCHED In THICK and DELICIOUS Mushroom Gravy. YOU MUST TRY THIS! How to Clean Burnt Stove Top – Glass or Ceramic – THIS REALLY WORKS! An error occurred while retrieving sharing information.

What to use to clean toilet bowl at Merry Maids?

Soak an old toothbrush in the vinegar or lemon juice, and scrub those spores. In addition to having the toilet cleaning tips you need, Merry Maids also tackles commodes as part of their bathroom cleaning services.