How do you clean plexiglass without scratching?

When it comes to tough messes, you will want to soak the clean cloth in water and then add a non-abrasive cleaning agent (like dish soap) to the fabric. Clean the acrylic, turning the cloth often and adding more cleaner as needed. Rinse dirt from the cloth before adding more cleaner to prevent smudging or scratching.

What can I use to clean Lexan?

Wash Lexan™ Sheet with a mild soap or detergent (e.g., Joy** dishwashing liquid) and lukewarm water using a clean sponge or a soft cloth. Rinse well with clean water. Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots.

How do you clean polycarbonate without scratching it?

Clean polycarbonate gently using warm water with a few drops of liquid detergent and a microfibre cloth. Put plenty of water in your bucket so that you can rinse the cloth frequently. This prevents any dirt and grit from scratching the polycarbonate.

Can I use Windex on Lexan?

Cleaners such as Windex or 409 will harm your new piece of polycarbonate. Use only products specifically recommended for cleaning polycarbonate such as Novus #1, or Brillianize, and a soft cloth. (All are available in our showrooms and OnLine). Never use a dry cloth or your hand to clean your polycarbonate!

Does Lexan yellow with age?

Cons of Lexan: Can be yellowed over time by UV rays. Low level of resistance to abrasive cleaners and surfaces.

What can I use to disinfect plexiglass?

Use your normal cleaning solution of water and GG4 or dish soap is safe to use. You can safely add Clean and Shine to your bucket to sanitize the Plexiglass. For tougher cleaning, you can use Winsol’s non-abrasive Poly Clean, applied with a microfiber towel.

Can I use Windex on plexiglass?

To get the maximum life out of your plexiglass, never, ever use cleaning solution that contains ammonia to clean your plastic. Cleaners such as Windex or 409 will do more harm than good. Use only products specifically recommended for cleaning acrylic such as Novus #1 or Brillianize, and a soft cloth.

How can I get scratches out of plexiglass?

Wet the cloth with a recommended cleaning solution or with soapy water. After wetting the cloth, start lightly blotting the acrylic then gently spread the solution onto the entire surface. Use the dry side of the cloth to buff the area and remove any lingering liquid or suds. Avoid aggressively rubbing the plexiglass as this may cause scratches.

What kind of cleaner do you use to clean plexiglass?

Once excess grime has been removed, spray a nonabrasive acrylic cleaner, such as Brillianize ( buy on Amazon) or Novus No. 1 ( buy on Amazon ), onto a one- or two-foot-square section of plexiglass. (For an on-hand alternative, a solution of mild dish soap and water works well too.)

What’s the best way to clean Lexan products?

CLEANING INSTRUCTIONS Wash using a mild soap or detergent (see list of approved cleaning products below) and lukewarm water, using a clean sponge or a soft cloth. Rinse well with clean water. Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots. Do not scrub or use brushes on this product.

Is it OK to rub Plexiglas completely dry?

Never rub PLEXIGLAS® completely dry. This results in the brand acrylic glass becoming electrostatically charged, which in turn attracts dust. This may also result in scratches on the surface. PLEXIGLAS® makes it difficult for dirt to stick to the surface.

What kind of cleaner do you use to clean Plexiglas?

Tools and materials for cleaning PLEXIGLAS® 1 Lukewarm water 2 Dishwashing detergent 3 Intensive plastic cleaner, isopropanol or benzene-free petroleum ether 4 Antistatic plastic cleaner 5 Soft, lint-free cloth or soft viscose sponge