How do you fix a broken sink faucet?

turn off water at valve and remove faucet handle. Turn Off the Water and Remove the Handle.
remove bonnet and ball and cam assembly. Remove the Bonnet, and Ball and Cam Assembly.
remove spring with pliers and clean out sediment. Remove the Springs.
press spout back into place. Attach the Spout.

What causes a faucet to stop working?

Leaks are one of the most common causes of no water coming from tap. If your tap is not running, it may be due to a leak in your plumbing pipes. A leak can lower your water pressure and stop the flow of water completely. If you notice any leaks, you should contact your plumber to fix your pipes.

Should a faucet drips after turning off?

The faucet valve (working parts) is housed in the handle and controls the on/off, volume, and temperature control. Over time, a faucet valve can lose its ability to make a water-tight seal, so water will drip out even in the off position.

Can you remove the handle of a ball faucet?

If you can’t loosen the Allen screw on the handle of a ball-type faucet, don’t let that 15¢ screw force you into a $100 faucet replacement… just yet! Normally you have to remove the handle to get the worn rubber seats that cause the drip (Figure A).

What to do if your kitchen faucet handle is stuck?

If the Allen screw is stuck, or if you strip it so it won’t come out, remove the cap with the handle still in place. You can’t grab the flattened edges with the handle in place. Instead, for this kitchen faucet repair, cushion the jaws of pliers and grip the round edge below.

How do you disassemble a compression faucet?

Here’s how to disassemble a compression-type faucet and stop a drip: Shut off water supply, and remove faucet handle held to main body of faucet by unscrewing tiny screw on top or at back of handle. Some screws are hidden by metal or plastic button or disc that snaps out or is threaded. Once you get button out, you’ll see top-mounted handle screw.

Can a drippy ball faucet be repaired?

Repair a drippy ball-type faucet using these pro tricks to deal with stubborn screws. You may have to replace the handle, but not the entire faucet. If the Allen screw is stuck, or if you strip it so it won’t come out, remove the cap with the handle still in place. You can’t grab the flattened edges with the handle in place.

Can a faucet handle be repaired before turning off the water?

If you attempt to fix the lever faucet handle before turning off the water then you’re going to be left with a huge mess on your hands. Before you begin any plumbing work the water needs to be off and this is easy to accomplish. There is no need to turn off the main water line if the shut off is under the sink.

How do you remove a lever faucet handle?

Removing a lever faucet handle varies from faucet to faucet but these models are all generally alike. They will require the use of either Allen wrenches or micro screwdrivers. On the front base of the lever faucet handle will be a logo of some sort or a sticker.