How do you fix a leaking old shower faucet?

Gather Tools and Materials.
Turn Off the Water Supply and Open the Faucet.
Remove the Handle Cap, Handle and Faceplate.
Remove the Locking Clip.
Remove and Replace the Cartridge.
Replace Other Parts and Test.
Remove the Metal Stem in a Shower Faucet with Two Handles.
Replace the Metal Stem if Needed.

What would cause a shower faucet to leak?

What Causes a Leaky Shower Faucet or Shower Head Drip? When water drips or drizzles from a shower head, there is a problem with the shower faucet (valve). In most cases, inner seals are worn, or parts have become corroded or clogged with hard water deposits. When they do, water squirts or drips out.

How do you stop an old bathtub faucet from dripping?

How it’s done

Shut off the water supply. The first step when fixing a leaky bathtub faucet is shutting off the water supply.
Remove the cap from the faucet.
Unscrew the handle screw.
Remove the handle.
Remove the escutcheon.
Remove the stem assembly.
Check the washer.
Replace the washer.

How do you fix leaky shower faucet with one handle?

Again, to fix a leaky shower faucet with one handle, turn off the water supply and let the faucet drain. Remove the cover cap over the handle, if there is one. Remove the handle and faceplate. Remove the locking clip over the valve, if there is one.

Why does my shower faucet keep leaking water?

There are many reasons a shower faucet could begin leaking. Loose nuts. If the leak is around the packing nut area, or at the base of the handle, the nuts might be loose. Worn out washers. Poor quality washers. Improperly installed washers.

What to do if you have a leak in your shower?

Replace the locking clip, if your valve had one. Then replace the valve sleeve, faceplate and shower handle and cover, if the handle had one. Turn the water supply back on, open the faucet and let the water run. If you still have a leak, you may need to call a professional plumber.

Where is the valve on a shower faucet?

The water valve controls the flow of water to your shower faucet, and it’s often located in your bathroom or basement. You may find it behind a panel that’s located on the other side of your shower. Turn the knob on your shower valve clockwise to shut off the water.

How do you fix a leaking faucet?

Here’s how to fix a leaky faucet. BRIEFLY: Turn off the water beneath the sink and drain the faucet by opening it. Disassemble the faucet by removing the handle screw and handle as discussed below. Pry or pull off the escutcheon or cap if it has one. Pull out the cartridge, threaded spindle, ball, or disc.

How do you fix a leaking shower?

Turn the knob on your water valve counter-clockwise so the water will come back on. Then, turn on the shower faucet to see if it works correctly. Finally, turn off the shower and make sure the leak is gone. If your shower is still leaking, you’ll need to call a professional plumber to fix it.

How do you rebuild a shower faucet?

1. Turn off the water to the shower. 2. Remove handle and escutcheon plate to expose shower valve. 3. Loosen locking nut with pliers and pull old cartridge from center of valve. 4. Put new rubber seat with spring onto end of pencil and push into the valve. Repeat for remaining seat. 5. Insert the new cartridge into the existing valve.

How do you repair a bathroom shower faucet?

How to Repair a Leaking Bathroom Shower Faucet Step 1 – Shut Off the Water Step 2 – Disassemble the Faucet Step 3 – Replace Bad Washer Step 4 – Check the Valve Stem Seat Step 5 – Remove the Seat and Replace It Step 6 – Grind the Seat Smooth Step 7 – Clean and Reassemble the Faucet Topics: