How do you get the sulfur smell out of a sump pump?

Excess water can encourage the growth of mold, mildew and bacteria that create foul odors. Properly adjusting your float switch will ensure that the water in your sump pump remains at an acceptable level. If the water develops an unpleasant smell, you can eliminate the odor by simply adding a diluted bleach solution.

What does it mean when sump pump beeps?

When the sump pump starts beeping, it can be annoying, but it’s signaling to you that it needs assistance. If your sump pump battery is beeping, it is alerting you that it has lost power. However, if the power is on, it could mean that the water levels are low.

Can I pour bleach in my sump pump?

A DIY remedy to remove sump pump odors is to use a bleach solution in the sump pit. Create a diluted bleach solution, one cup bleach for every one gallon of fresh water. Pour the solution into the sump basin, until water volume activates the float switch and the sump pump turns on.

How long should sump pump last?

about 10 years
How Long Does A Sump Pump Last On Average? Like other appliances and equipment in your home, your sump pump won’t last forever. Averaging about 10 years, you might not notice your sump pump has malfunctioned until it has stopped working.

How often should I Clean my sump pump?

Most sump pump models should be cleaned once a year but check your manual for more detailed information. If you don’t feel comfortable cleaning it yourself, you could always have an expert do it for you, but either way you should familiarize yourself with the process.

How do you clean a sump pump pit?

Drain any standing water from your sump pit using a shop vac. If you have a check valve that can be disassembled, carefully disassemble and allow any water to drain out of your check valve first, then remove it. Rinse the valve thoroughly with water, then dry and reassemble it.

How can I Keep my sump pump working?

To keep your sump pump working properly you will need to occasionally clean it. Here’s how. Unplug your pump from its electrical power source. Or, at your circuit breaker panel, turn off the circuit that supplies power to your pump. Locate the discharge pipe your pump is connected to and disconnect it.

Can a cast iron sump pump be cleaned with bleach?

Cast iron and thermoplastic sump pumps can safely be cleaned with bleach. Cleaning the drain pipe is just as important as cleaning the pump and basin. Every few months you should pour a few buckets of water down the discharge pipe just to makes sure everything is flowing normally!

How often should I Clean my sump pump pit?

Sump pump pits need cleaning every so often. Ignoring cleaning your pump and pit puts you at a higher risk of clogs, floods and can let mold and other bacteria grow hidden under the pit cover. Many people know that they need to clean their pit and pump from time to time but are not sure what to do.

Can you use hot water to clean sump pump?

While waiting for the vinegar to dissolve, prepare 5 gallons of hot water. When the hot water is ready, pour it in the sump pit. You can do this without removing the sump pump but this way is more efficient. Lastly, put the sump pump back in the sump pit and turn it on.

What should I do if my sump pump is leaking?

Always unplug your sump pump or turn off the power on your circuit breaker. Make sure no one in your home is operating any appliances that may drain into the sump pit, like a washing machine, or any basement water draining into the sump pit, and always wear protective gloves when handling gray water.

What causes a sump pump to stop running?

Stuck sump pump switches – Especially in cheaper models, the float switch can become clogged or tangled (see #3 above). In some cases, the vibrations of a running sump pump can cause it to lean on the edge of the pit or liner, disabling the sump pump switch.