How do you install a toilet flush chain?

Reattach the chain to the flush lever bar or the flapper valve if it has come loose. The chain connects to the flush lever bar with a small metal clip and attaches to the flapper valve with a small metal ring. Slip the chain back onto the clip or ring and use needle-nose pliers to tighten the link or ring.

Why does my toilet chain keeps getting tangled?

The links in a toilet chain will constantly twist and become tangled up because the chain is too long. You can repair it by either adjusting the chain or the trip lever.

How do you keep a toilet chain from falling off?

Remove the lid from the tank.
Turn off the water supply running to your toilet.
Identify the problems with the chain.
Reattach the chain to the flush lever bar or the flapper valve if it has come loose.

Why does my toilet handle stays down after flushing?

What you will discover, is that the need to jiggle or hold down the handle usually indicates that you need to adjust the chain inside the toilet tank. The chain connects the lever, also known as the flush arm, to the flapper.

How do you stop a kinking toilet chain?

Fixing the Problem Adjust a chain that is too long, so that there is the least amount of slack between the trip lever and the flapper. Either remove the chain and cut off the extra links, or move the chain’s connection with the trip lever down, further away from the flapper.

Where is the flush handle on a toilet?

To view the Flush Handle Replacement Playlist = http://www.youtube.com/view_play_list… A toilet’s flush lever is often located on the top left-hand side of the tank, and is made out of metal or plastic. This lever is actuated each time the toilet is flushed.

How do you install a new toilet handle?

Installing the New Handle Purchase a new handle for your toilet. Pull off the mounting nut and O-ring from the new handle. Slide the lever into the toilet tank. Put the O-ring and mounting nut back on and screw them counterclockwise. Attach the chain to one of the holes in the lever so there’s 1 in (2.5 cm) of slack.

How is the chain attached to a toilet handle?

The chain is connected to the arm by a clasp. Before you unhook it, note onto which hole the chain is hooked, so you can hook it to the same hole on your new lever. Use your crescent wrench to loosen up the metal nut that holds the handle in place.

How do you remove handle from toilet tank?

Use your crescent wrench to loosen up the metal nut that holds the handle in place. The nut is inside the tank, and it has left-handed threads, which means you’ll need to turn it in the reverse direction to normal nuts. Once you’ve loosened the nut, use your fingers to unscrew it the rest of the way and remove it, sliding the arm through the hole.

How do you install a new flush valve on a toilet?

Remove the toilet tank and gently place it upside down on an old towel or rug. Unscrew the spud nut with a spud wrench or a pair of slip joint pliers and remove the old flush valve. Slide the cone washer onto the tailpiece of the new flush valve – the beveled side of the cone washer should point toward the end of the tailpiece.

How do you replace chain in toilet tank?

New chains can be purchased at your local plumbing or hardware store. Use needle-nose pliers to remove the old chain from the tank, including the metal ring on the flapper valve and the small clip on the flush lever bar. Open the small metal ring that came with the new chain. Insert the metal ring into the hole at the top of the flapper valve.