How do you open a safe when the battery dies without a key?
How do you open a safe when the battery dies without a key?
The battery pack is inside the door and batteries can only be replaced with the safe open. To access the override lock, there is usually a removable panel to the side of the keypad. Undoing this will uncover the lock for the key to be inserted. If you have lost the override key then you cannot open the safe.
How do you change the batteries in a Honeywell safe?
Slide off the keyhole’s cover and insert the override key into the slot. Then, disengage the lock by turning the key to the left. Next, turn the knob and open the door to pull open the battery cover on the inside door of the unit. Replace the batteries with fresh alkaline AA batteries and install the cover back.
What do I need to open my Honeywell safe?
There are two types of override keys that can be used to open a safe. First, insert the Entry key into the key slot. Then, turn the key to the right. Finally, open the door. Make sure to do this within five seconds as the door auto locks itself after that.
Where is the key number on a Honeywell safe?
A. The key number is normally located on both the key and front side of the lock. Q. I received my safe locked and need to know how to open it? 1. Digital safes with an override key can be opened using the key. See operating manual for location of key lock. 2.
How do I unlock my Honeywell safe door?
To unlock the device for the first time: Enter the factory passcode ‘159’ on the keypad. Then, push the ‘#’ key. Next, turn the circular knob to the right. Finally, open the door. Press ‘159’ again on the keypad and locate the small red button on the lower right side of the safe door.
Slide off the keyhole’s cover and insert the override key into the slot. Then, disengage the lock by turning the key to the left. Next, turn the knob and open the door to pull open the battery cover on the inside door of the unit. Replace the batteries with fresh alkaline AA batteries and install the cover back.
Where is the override key on a Honeywell safe?
The emergency override keyhole will be located under the batteries. Insert your Honeywell safe key into the lock and turn it clockwise as you turn the handle of the safe’s door. Once you’ve accessed your safe, turn the emergency key counterclockwise, remove it from the keyhole and close the door of your safe.
There are two types of override keys that can be used to open a safe. First, insert the Entry key into the key slot. Then, turn the key to the right. Finally, open the door. Make sure to do this within five seconds as the door auto locks itself after that.
Are there any problems with a Honeywell combination safe?
Many people rely on their Honeywell combination safe to store important or valuable items. However, there can be issues when it comes to accessing what’s inside. These problems can include lost passcodes, missing emergency keys or instances where your Honeywell safe batteries are dead.