How do you remove Aqualisa shower?

The external covers and knobs can be removed relatively easily by simply pulling them off. Depending on the particular model, you may need to use your flat screwdriver here as a lever to prise them away from the valve.

How do you fix a leaking quartz Aqualisa shower?

The problem is in the mixer valves so we need to disassemble the valves and re-grease the valve parts.

First things first, turn off the mains electrical power.
Turn off the hot and cold water.
Remove the one screw securing the cover and remove the cover. (
Unplug the four connectors at the bottom of the Logic Module. (

How do you replace an Aqualisa in a shower?

Once everything’s as it should be, screw the cartridge into the valve – although be wary if you’ve got an older model that you might be using brass inserts to do this. If this is the case, you should make sure you don’t screw them in too tightly, as this could cause them to split – something that could cause you quite a headache!

How long does it take to clean an Aqualisa shower head?

The PRD will need to be replaced and We would advise to check for any restrictions in the shower head or hose, by this we mean kinks or twists in the hose or lime scale blockages in the spray plate of the shower head, this can be cleaned by soaking the component in warm water and white vinegar for approx. 20 minutes.

How do I Disconnect my shower head from the fixed arm?

HOW DO I DISCONNECT MY SHOWER HEAD FROM THE FIXED ARM OR FLEXIBLE HOSE? Aqualisa fixed shower heads have a basic threaded connection and simply unscrew from the fixed arm.

What’s the guarantee period for an Aqualisa shower?

We advise to allow 3-5 working days for delivery. WHAT IS THE GUARANTEE PERIOD ON PROCESSORS? The guarantee period on a processor when purchased with a complete shower is 5yrs. If the processor unit is purchased on its own as a spare part then this will come with a 2yr guarantee.

How do you replace an Aqualisa shower valve?

Remove it using your Torx T25-bit screwdriver, making sure to unscrew it evenly so that it disengages from the valve smoothly. After removing it, you might wish to consider replacing an O-ring, which is right at the back of the valve.

Can a bar mixer valve fit in an Aqualisa pipe?

1. Measure the distance between the centres of the pipes coming from the wall. 2. If this distance is 150mm, then a bar mixer valve will fit. 3. However, pipework modifications will be needed if:

How do you replace a shower head holder?

In this video, we demonstrate how to replace a shower head holder, including adjusting the riser rail as part of the process. You will need an appropriate screwdriver for the riser rail. Please remember to cover the plug hole in the bath or shower tray to avoid losing any screws.

Can you replace an Aqualisa cartridge with a new one?

Although the knobs on the front can look very different, this is just a case of the manufacturer ensuring the unit continues to look modern. Once you remove the casing, the models pretty much remain unchanged since the 80s. Here’s a brief guide to help you swap your old Aqualisa cartridge for a new one.