How do you remove the drum from a Maytag front load washer?

Disconnect the power cord before working on the Maytag washer.
Remove the two screws at the bottom of the front toe panel.
Remove the screws at the base of the upper front panel.
Remove the screws connecting the top panel to the side panels.

Can you remove washer drum?

Fortunately, a Whirlpool washer drum removal can be easily undertaken if you have some mechanical skills to handle appliances.

How do you remove Maytag washer from wall?

Disconnect the power cord of the Maytag washer from the wall outlet. Remove the two screws on the bottom edge of the front panel with a Phillips-head screwdriver. Pull the bottom of the front panel away from the washer to disengage the clips under the top panel.

Why is my front load Maytag washing machine leaking?

Washer Leaking From The Front If your front load washer is leaking from the front, specifically leaking during a spin cycle, it’s a safe bet that dirt on the door glass and gasket is the cause. A build-up of soap residue and grime will keep the washer door from sealing correctly during use.

How often should I Clean my Maytag front load washer?

Double check to make sure you’re using the right detergent. Front load washers require HE (high-efficiency) detergent in smaller amounts. Your Maytag washer manual will tell you the right amount of detergent to use for your model. Run a tub clean cycle once a month to keep your machine running optimally.

Where is the drum on a front load washing machine?

If you forget, you risk severe damage to the drum and the machine as a whole. The drum in this front-loader is horizontally placed. Both top- and front-load washing machines have metal drums that you must secure before you move the appliances. The metal drum inside a washer holds the clothes; it’s where the washing takes place.

How to remove the front panel from my Maytag clothes dryer?

Put the door aside. The front panel of the Maytag clothes dryer is shaped like a goal post. Grasp the skinny, upper sides and wiggle them back and forth to unclip the panel. Pull the skinny ends of the front panel toward you, lifting it off the bottom clips. Set the front panel aside.

How do you fix a squealing Maytag dryer?

Reach under the exposed drum and press the tensioner arm to release the belt that is wrapped around the drum and the motor. It is relatively easy just to pull the belt off. Note: The belt you want to remove is the one going around the drum (seen on the top of the drum in the photo below), not the fan belt, leave that one in place.

How do you remove the top of a dryer?

The first step is to unplug the unit. Then you will want to flip up the top of the dryer. In order to be able to do that, pull it out a little way from the wall. Then press the clips to release the top using the paint scraper. Press in the 2 tabs using a thin metal paint scraper to lift the top lid, as shown in the photo below.