How do you replace a seat in a bathtub?

Insert the new seat into the faucet body and tighten it with the seat wrench. Remove the seat screw from the end of the faucet stem to release the seat washer. Place a new seat washer on the end of the stem. Use a new seat screw to secure the washer to the stem. Insert the bathtub faucet stem into the faucet body.

What happens when you replace the stem on a faucet?

After replacing, reinstall the faucet assembly and check for leaks. The O-ring, also called a toric joint, is attached to the stem screw. This screw is what holds the handle of the faucet in place. The O-ring keeps the water from seeping out from around the spout.

How do you remove tub stem from wall?

Slide a tub socket wrench over the stem. Turn the wrench counterclockwise to remove the bathtub faucet stem from the faucet body in the wall.

Why are the seats in my bathtub not working?

Over time, the seat washer on the back of the faucet stem can become brittle and can damage the seat inside the faucet body. When this happens, the stem can no longer create a seal when you shut off the faucet, and water begins to leak. Fix the seats in the bathtub faucet by replacing them and the washers.

Can a faucet seat be replaced in a bathroom?

Faucet seats can easily get worn out with age, leading to a compromised seal, and the dreaded leak. Instead of wasting time and money on a complete faucet replacement, try a faucet seat replacement instead. Danco carries faucet seats in all your favorite brands, including American Standard, Steamway, Kohler and more.

Can a stem be replaced on a washer?

The new stem should have a washer preinstalled on it. Check and be sure it was tightened down. Be sure the stems are in the open position before inserting them into the body of the faucet. The washers can bind against the seats during tightening causing damage. And sometimes you can do everything right and it still leaks.

Can a new stem be inserted into a valve seat?

What to do if your faucet is still leaking after replacing the stem?

After using the Valve Seat Grinder, rinse off the valve seat and reattach to the faucet. If your faucet is still dripping, you will need to replace the faucet valve seat. Buy an identical valve seat from the plumbing or home supply store. Install this and check for leaks.

How do you remove a faucet handle from a tub?

Insert a small slotted screwdriver into the small opening along the edge of faucet handle insert. Pry the plastic inserts from the faucet handle to expose the faucet handle screw. Remove the handle screw, and pull off the faucet handle. Unscrew the escutcheon plate covering the valves stem. Slide a tub socket wrench over the stem.

How do you replace the handle on a bathtub?

When doing this, place a scrap piece of wood between the screwdriver and the wall to make the job easier and protect the wall. If the handle is wet or you notice water leaking from the valve stem when you remove it, turn off the water, remove the stem and replace any worn washers.

How do you remove a faucet stem from a tub?

To remove the handle, pry off the decorative cap and remove the screw; use a hex wrench or screwdriver as needed. Lift off the handle. If the stem protrudes far enough past the wall surface, loosen it with an adjustable wrench or groove-joint pliers.

How do you replace a stem on a shower valve?

Use a valve socket and pliers to loosen and remove the old stem from the wall. 7. Unthread the existing seat from inside the valve with a seat wrench. 8. Brush pipe-thread sealant onto the threaded end of the new stem seat. 9. Use the seat wrench to tighten the new stem seat into the valve.