How do you run two lights from one switch?

Green to ground, the white wire on the timer to the neutral (white wires) splice that will be in the box, and the black wire on the timer to the hot conductor (one of the two on the existing switch), then the timer red wire to the black wire on the existing switch that is connected to the lights.

Is the wiring the same for two way switches?

The switch wiring is all the same but the switch wire (cable C) leads up to a different set up. Fig 3: 3 way switching wired to a loop-in-loop-out radial lighting circuit done with junction boxes 2 way switching means having two or more switches in different locations to control one lamp.

How does cable D connect two light switches?

Cable D (Fig 2) is a three core and earth, this is the ‘3 wire control’ that links the two light switches together. COM on the first switch connects to COM on the second switch, L1 on the first switch connects to L1 on the second, and L2 on the first switch connects to L2 on the second.

What kind of wire connects two light switches?

This is cable C below, one wire connects to L1 and the other to L2 on the top switch. Cable D (Fig 2) is a three core and earth, this is the ‘3 wire control’ that links the two light switches together.

How is a double switch wired to two separate lights?

The essence of the wiring configuration is for one hot feed wire entering the switch box to be split so that it feeds both switches, which in turn feed hot wires in cables that lead out to two separate light fixtures. However, the actual look of the wiring in the box can vary, depending on where the switches are located along the circuit run.

Can you wire a 3 way light switch?

Two of these will have the light or fixture on, two will have it off. I prefer #1 and #2 to be “off”, with #3 and #4 on. If your light is off for #3 and #4, and you’d prefer it the other way, you can exchange the traveller wires at (only) one of the two switches.

How to install a 2 gang light switch?

Get a 2-gang box to replace your existing 1-gang box. Get a new switch. Remove your existing box and install the 2-gang box in its place. Run your supply hot wire to both switches. Connect the light/fan hot wire to one switch and the exterior light to the other. Join all neutrals and ground wires. You also mentioned wanting to add a fan control.

Where are the neutral wires on a double switch?

They are often, but not always, red or black, and on the side with a small metal tab, or fin. There will be two neutral wires connecting to your two appliances, and each one will correspond to a switch on your double-switch when you are done. They are often, but not always, white.