Info

The hedgehog was engaged in a fight with

Read More
Q&A

How do you tell if a battery is being charged in a circuit?

How do you tell if a battery is being charged in a circuit?

The direction of current through the battery determines whether it is charging or discharging. The battery is trying to push current in a particular direction. If the current flows in that direction, the battery is discharging. If the current flows in the other direction, the battery is charging.

How charged is a new battery?

When you buy a car battery, it typically comes sufficiently charged to start your vehicle, to around 90% of capacity or so. It isn’t required to charge a car battery before its first use. However, under normal driving conditions, the alternator is unlikely to charge your battery to full capacity.

What is battery circuit breaker?

A battery circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage due to overload or short circuit. Unlike a fuse that runs once and needs to be replaced later, a battery circuit breaker can be reset (manual or automatic) to maintain normal operation.

What is the function of circuit breaker?

A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overcurrent/overload or short circuit. Its basic function is to interrupt current flow after protective relays detect a fault.

What happens when you turn over a circuit breaker?

Upon initial turn over the circuit breaker clicks and everything goes dead, no lights, ignition or anything else electrical. After replacing the circuit breaker everything looks good but when I hit the start button the breaker clicks and I’m back to square one. First welcome to the forum! Now you reset the breaker or replaced it?

What happens when you replace the circuit breaker on a Harley Davidson?

Upon initial turn over the circuit breaker clicks and everything goes dead, no lights, ignition or anything else electrical. After replacing the circuit breaker everything looks good but when I hit the start button the breaker clicks and I’m back to square one.

What’s the Max current rating for a circuit breaker?

The maximum safe current limit is 80% of the rated size of breaker except some motors. Keep in mind that the breaker size should not increase the max amperage rating of cable and wire. Below is the given chart showing the % of max current rating of breaker size for different types of load currents.

What causes a starter to blow a circuit breaker?

Something is shorting to blow the breaker. Since it is only happening when you hit the start button you would have to guess that the starter circuit is going to ground. Follow the wires and look for bare spots. Could be the starter motor/solenoid. This link is for cars but the principal for checking applies Bench Testing a Starter Motor

What is the current rating of a DC circuit breaker?

The battery circuit breaker sizing current=1.25×charging current=1.25×533A=666A. The standard rating of a DC circuit breaker is 700A. The battery short-circuit current, per published data for the battery=14,750A. Therefore, the recommended circuit breaker in this example=700A, 65VDC, 15,000 AIC.

How big is the battery bank for a DC breaker?

The inverter will draw max 180A…but the surge capability of the inverter is up to 12000W…which is 250A. The maximum current output from the Classic (assuming perfect weather) will be ~100A…so for three Classics that is almost 300A that will go into the battery bank max…right ? 1).

What does a disconnect circuit breaker do for a battery?

Each battery string is provided with a separate disconnect circuit breaker, which serves to isolate the faulty battery string during overcurrent conditions and prevents problems in the string from affecting the other strings, chargers, circuit cables, and connected DC load.

How to determine the maximum charging current of a battery?

From the above, we can determine that the maximum battery circuit current=charging current=400A. The battery circuit breaker sizing current = 1.25 x charging current = 1.25 × 400A =500A.