How do you use a Master lock combination lock?

How do you use a Master lock combination lock?

To set your own combination:

1. OPEN lock and TURN shackle 90° to position I.
2. PUSH shackle in to lock until it “clicks.”
3. TURN shackle another 90° to position II.
4. SET dials at black indicator line to desired combination.
5. PULL shackle UP. VERIFY dials remained set to your combination before locking.

How can I find the combination to my Master lock?

Turn the dial 3 times to the right and stop on the first number of the sequence. Turn the dial to the left, pass the second number of the sequence and stop on it the second time around. Turn the dial to the right and stop on the third number of the sequence. Push the button while pulling the shackle.

How to open your safe by dialing the combination lock?

1. Turn Dial 4 Times to the LEFT, then stop Exactly at “Your First Number” 2. Turn Dial 3 Times to the Right, Passing “Your Second Number” twice, then stopping exactly on “Your Second Number” the Third Time. 3. Turn Dial 2 Times to the Left, Passing “Your Third Number” once, then stopping exactly on “Your Third Number” the Second Time. 4.

Can a locksmith find the serial number on a dial safe?

If the safe is a dial, and you were able to find the serial number, the locksmith will most likely will be able to retrieve the original combination to the safe. So long as the safe combination has never been changed, this will open the safe.

Is there a fourth number on a combination lock?

Manufacturer’s combination cards often show a fourth number – this is the same number at which the dial will stop. These locks are rare; it is very unlikely you have one of these. Sentry safes are the most common safes on the market.

Where do you turn the dial to unlock the safe?

To unlock the safe turn the dial in the direction of the arrow for each number, stopping at the opening index mark (crow’s foot) located. at the top (12 o’clock position) of the dial ring. You must dial the combination precisely without backing up.

How do you open a combination safe lock?

A very small number start to the right, then left, then right. Turn safe handle. If there is no safe handle, then turning the dial back to the Right again will unlock the safe. In addition to the dial, these usually have a thumb turn or key that draws back the safe bolts.

Manufacturer’s combination cards often show a fourth number – this is the same number at which the dial will stop. These locks are rare; it is very unlikely you have one of these. Sentry safes are the most common safes on the market.

When does the dial stop on a combination lock?

If you dialed correctly, the dial will stop in less than one full turn. You will feel the lock “engage” about eight numbers before it stops. Manufacturer’s combination cards often show a fourth number – this is the same number at which the dial will stop. These locks are rare; it is very unlikely you have one of these.

How to dial a safe combination-Acme locksmith?

1) Spin the dial left (CCW) at least four times and stop on the first number of the combination. The first number should be directly under the opening mark. First number: ________. 2) Spin the dial right (CW) and stop on the second number the 3rd time the number comes under the opening mark. Second number: ________.