How do you use a Moen valve puller?

Remove the Cartridge Grip the handle of the puller, and twist the puller back and forth, clockwise and counterclockwise, as you pull straight out. Continue the back and forth motion until the cartridge pulls out of the valve body. The valve is now ready for a replacement cartridge.

How do you remove a Moen kitchen faucet?

To Remove Moen Kitchen Faucet. Regardless of the type of faucet being installed, there are a few basics steps everyone will follow. First, shut off the water supply to the old faucet using valves typically located under the sink. Then remove those supply lines and the old faucet.

How to replace a Moen Roman tub valve cartridge?

Watch the Servicing the 1258 Duralast Cartridge in Roman Tub Valves Video: In addition, depending on the faucet model you have, your cartridge removal and new installation may require the following tools. These tools are purchasable here at Moen.com. Simply click on the link or the picture to add them to your cart.

Where does the diverter go on a Moen kitchen faucet?

Some faucets have a collar-type device that fits over the valve housing at the base of the spout. On other models, the diverter is a cartridge inserted into the valve housing at the base of the spout.

What kind of cartridge does Moen hot water faucet use?

Cartridge 1234 – Two-handle Duralast® cartridge for two-handle lavatory and kitchen faucets (hot or cold). Please note that your cartridge may have an imbedded cartridge nut. Refer to the documentation that came with your faucet.

How to repair a Moen 87480csl?

Turn off the water before servicing the faucet. Open the cold and hot sides of the faucet to allow water to drain.
Pry the small cap off of the faucet handle with a flat-head screwdriver.
Unscrew the handle dome by gripping it with a rubber glove and turning it counterclockwise to unscrew it.

How to repair a Moen faucet cal84502?

How to Repair a Moen Faucet CAL84502 Turn off the shutoff valves under the sink and open the faucet to relieve water pressure. Pop off the decorative plug located just under the handle with a flathead screwdriver and unscrew the handle screw with an Allen wrench. Unscrew the handle adapter with a Phillips screwdriver and lift it off the valve assembly, then remove the dome.

Do Moen faucets have washers in them?

However, Moen faucets are designed with cartridges, and it is these you replace and not washers per se. Whichever Moen faucet model you have, you need only a few tools, a few minutes and a little patience to replace Moen faucet cartridges.

How do you replace a faucet valve?

How to Replace a Faucet Valve Stem Step 1 – Turn Off the Water and Faucet Step 2 – Cover the Drain and Open Handle Step 3 – Take Notes and Remove Screw Step 4 – Remove Handle and Disassemble Step 5 – Remove Stem and Go to the Store Step 6 – Check the Washer and Replace Fittings Step 7 – Replace Parts and Test