How high can a toilet flange be?

1/4 inch
With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

Does the toilet flange have to be level with the floor?

5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.

How big should the flange be on a toilet?

Setting a Toilet with a High Flange Above the Floor – YouTube This might help you if you are trying to set a toilet with a high flange. This particular toilet flange was 5/8″ ABOVE the floor level. This might help you if you are trying to set a toilet with a high flange. This particular toilet flange was 5/8″ ABOVE the floor level.

What is the flange on a septic tank?

A toilet flange is a device that joins your toilet bowl into the septic tank pipe. They come in various materials such as PVC or cast iron. The flange is bolted to the floor in order to secure the toilet bowl. With the flange is a gasket used to ensure that you will not have a leaky toilet.

What can I do about a 1 / 4 inch flange?

Be sure to PUSH the toilet down, with a slight (very slight) twist. If you use two rings it will eventually leak. You need one thick wax ring. This one or Oatey’s version can cover a 1/4 inch. Check out this product from Korky. I find that it’s a lot easier to use than wax.

Which is the cheapest flange extender for a toilet?

In summary, the set-rite (~18 + shipping) is the most expensive and apparently the only code approved product. The cheapest option is flange extenders ~$3-5.

How tall should the wax ring be on a toilet?

These rings will prevent the toilet from properly recessing into the flange. Instead, use a standard ¾ inch wax ring. The first thing you’ll want to do when replacing or readjusting the height of your flange to shut your water off and remove the toilet from the floor. Once removed, examine where your flange is resting.