How many bags of quikrete do I need to set a fence post?

When you’re installing a fence post, the amount of concrete you need will be calculated based on the diameter of your fence post and how high the post is above ground. Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place.

Which quikrete is best for setting posts?

Fast-setting concrete
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

Can I use quikrete for fence posts?

For a small to mid sized job I recommend going with premixed. The best concrete mix for fence posts I’ve found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It’s 4000 psi, easy to work with, sets up fast, and doesn’t need to be mixed. Just pour it in the hole and soak with water.

How deep should post be for 8 foot fence?

about 2 feet deep
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

How many posts will a bag of Postcrete do?

2 bags per fence post. Use a proper post hole shovel, the clamp type, and keep the hole narrow. Dig 2ft down.

Is 3 feet deep enough for fence posts?

Is 3-Feet Deep Enough For Fence Posts? As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.

How many bags of concrete for a fence post?

This will give you the volume of your post hole, which in turn will tell you exactly how many bags of concrete you need. Most concrete comes in bags that are anywhere from 10-80 pounds, but we will be using the same 50-pound bag example from earlier in the article.

Do you need a fast setting concrete mix for fence posts?

Ride Sun nailed it, you don’t need an expensive mix for fence posts. Wood or galvanized metal, your biggest challenge will be keeping the posts aligned while the concrete sets. That may be one of the reasons some people recommend a faster setting concrete mix.

How much water to put in a hole for a fence post?

Use enough dry concrete to fill the hole up to about 3 – 4″ below ground level. STEP 6. Wet the concrete by adding about a gallon of water per 50 lb. bag of concrete mix. Let the water slowly soak into the concrete and completely saturate it. The fast setting mix will set hard in about 20 – 40 minutes.

What’s the best way to set a cement post?

Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.

How many bags of concrete to put in hole for fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

What kind of concrete do you use to set a post?

Standard concrete mixes such as Sakrete High-Strength Concrete Mix and Maximizer Concrete Mix can also be used to set posts and poles but requires the material to be premixed prior to application. For a higher yield per bag material that requires fewer bags to haul, use Maximizer Concrete Mix.

What’s the best way to set a fence post?

Add more water and/or concrete to achieve the right consistency, and fill the hole to ground level. Mold the wet concrete so that it slopes away from the post. This will help keep rain or irrigation water from puddling against the fence post.