How much does it cost for a pilot light to stay on in gas fireplace?

The pilot light burns significantly less fuel than a fire but it can cost $8 to $10 a month if your fireplace is fueled by natural gas. If your fireplace is fueled by propane, it could cost up to $20 a month. Turning off the pilot would reduce your energy costs during the summer.

Why is the pilot light on my fire pit not working?

Fire Pit Pilot Won’t Light. If the gas valve has an electronic ignition, press the ignition button a few times — with the gas valve off — and verify that you see a spark. If the gas is open and you have a spark but the pilot won’t light, the pilot tube may be blocked. Unscrew it from the gas valve with a wrench,…

Why do you need a pilot light in a gas fireplace?

This continuous flame is necessary to light large burners such as those found in gas fireplaces. When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner. It also provides the energy necessary to open and close certain gas valves during startup.

What to do if your pilot light wont work?

First, locate the thermocouple to clean it using a piece of sandpaper. Always remember to shut off the gas before you start cleaning and to make sure that your thermocouple is cool. If you’re thermocouple still doesn’t work after cleaning, the issue may be that it’s bent.

How does a pilot light on a burner work?

Once it is hot, the thermocouple is generating the electricity needed to hold the value open. Then you can let go of the button. The problem with pilot lights is that they waste a lot of gas. Therefore, most modern appliances do not have a pilot light. Instead, they use a piezoelectric spark to light the burner.

Why does my Propane pilot light not stay on?

If the pilot won’t stay lit, the problem is usually related to the thermocouple, a heat-sensitive electrode that signals the gas valve to stay open when the pilot is on. The first step in the troubleshooting procedure is to ensure that the propane tank is not empty.

How to tell if gas is coming from pilot flame Hood?

Check to see if there is an even gap between the spark igniter, the pilot flame hood, and the thermocouple. If the spark igniter is to close to either the pilot flame hood or the thermocouple, it will “click” when the rocker switch is depressed, but the spark will not be big enough to light the gas from the pilot. 2.

What to do if pilot flame on propane fire pit is too far away?

Adjust the position of the thermocouple valve relative to the pilot flame; it may be too far away. Check the pilot flame. If it’s small and orange-colored, the pilot tube is probably obstructed. Clean the pilot tube with compressed air.