How much does it cost to install a rain sensor?

A: On average, cost for the sensors runs $18 to $40 and installation runs $125 to $150.

How long does it take for a rain sensor to dry out?

All Hunter rain sensors have an adjustable “Vent Ring.” Dry out time could be as little as 4 hours, depending upon weather conditions (temperature and humidity) and how the vent ring is set. If the weather remains cold and damp, your sensor could be active for months.

How do you turn off the rain sensor Hydrawise?

How can I Bypass my Rain Sensor?

Log in to your HYDRAWISE account.
Click the icon in the upper left. Skip this step on a PC.
Click SENSORS.
Click on the. icon under the active sensor.
Scroll down to the CONTROLLER INPUT.
Change the controller input to UNASSIGNED.
Click OK.

What do you need to install a rain sensor?

If you are installing your sensor yourself, select a model that has a closed wiring system. This means that the wiring is pretty much completed at the factory. All you have to do is plug in the wire assembly to the controller and sensor to make it work.

How does a rain sensor work on a sprinkler system?

A rain sensor is a device that can be attached to your sprinkler system to automatically turn it off when it rains. This minimizes the amount of water that you use to keep your lawn green and ensures that you don’t overwater your grass when it rains. You can easily install a sprinkler rain sensor yourself.

How big of a sensor do I need for my sprinkler system?

Keep the sensor away from water spouts or sprinklers that could spray water on it and activate its shut-off feature. Decide how much water is allowable before the sensor turns off your sprinkler system. Generally you can choose between 1/8 and ¾-inch.

What to do if your rain sensor is not working?

The rain sensor switch is in the “BYPASS” or “OFF” position. To fix this, slide the switch into the “ACTIVE” position. During installation of the rain sensor, the terminal jumper was NOT removed. To fix this, remove the terminal jumper located on the sensor terminal screws.

Can a rain sensor be added to an irrigation controller?

Adding a rain sensor to your irrigation controller is an easy and inexpensive way to help conserve water and save money. While today’s controllers are equipped with a dedicated sensor terminal, that is not always the case on older controllers or you may want to use more than one type of weather sensor.

Why is my sprinkler system not turning off when it rains?

Make sure the sensor is located in an area where it is unobstructed from the rain. Overhangs, trees or anything else that may prevent rain from reaching the sensor should be avoided. Wiring shorts on the sensor circuit will not allow the controller to recognize an open circuit when the sensor activates.

How does Hunter Rain Clik rain sensor work?

If the controller uses a normally closed sensor circuit (most common) the terminals will be connected by a jumper clip or wire. This terminal jumper will need to be removed for the rain sensor to operate correctly. Some controllers come with a Rain Sensor Bypass switch. Make sure the switch is in the “Active” or “On” position.