How much does it cost to pave a driveway in NJ?
How much does it cost to pave a driveway in NJ?
Paving an asphalt driveway costs $4,795 on average, with a typical range between $2,966 and $6,664. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.
Why does it cost so much to pave a driveway?
Labor. Labor also drives the cost of driveway paving since it’s a labor-intensive process. The labor cost to pave an average 450-square-foot driveway could run $5 to $7 per square foot or about $2,250. A driveway that has curves or is circular will cost more to complete, so labor costs will also increase.
How much does it cost to pave a driveway with pavers?
What Is the Cost of Paving a Driveway?
How much does it cost to put pavers on a driveway? | |
---|---|
Exposed aggregate finish | $100 to $150 per m2 |
Natural stone pavers | $75 to $100 per m2 |
Brick pavers | $70 to $90 per m2 |
Plain concrete driveway | $75 per m2 (on a sloping surface) $65 per m2 (on a flat surface) |
Do I need a permit to asphalt my driveway in NJ?
No, a permit is not required unless you are relocating the driveway or increasing the size of the driveway. If that is the case, then you will need to apply for a zoning permit.
Is it cheaper to pave a driveway or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.
Can I add a driveway to my house NJ?
The driveway must be 5 feet from the property line. However, if the driveway already exists and is less than 5 ft from the property line, it is grandfathered. Any widening of your driveway less than 5 ft from the property line requires an administrative waiver from the Land Use Office in addition to a plot plan.
How close to property line can driveway be?
Pretty much a standard, though, is that it must be eight feet back from the property line for any permanent structure with a roof. A driveway can be right at the property line, but not a garage, and in most cases not even a permanently-built carport, with just a roof.
Can You pave driveway up to property line?
Depending on your local laws, you may be able to pave a driveway right up to the line. In the case that you’re not allowed, you try asking your town for permission. If you are unsure, read on for some tips and guides regarding driveway and property lines.
What should I do if my Neighbor has a driveway?
If your neighbor is not willing to remove the driveway that encroaches on your property but is otherwise open to negotiations, then proper communication will be very helpful. You might want to suggest that usage of the encroached-upon land should come with an annual fee, for example.
Do you need a land survey to move a driveway?
Should there be encroachment issues that need to be resolved, the first thing to do is to have a land survey done by a professional. If for instance you want the neighbor’s driveway moved, then you need a proper land survey to determine if the driveway is indeed crossing your property.
How big of a setback do you need for a driveway?
The side setback is usually 5 feet minimum (on each side) for most regular neighborhoods. In some areas, you can indeed pave a driveway just on the property line but you still have to verify this with the local government. If you’re building a structure, however, then it’s certain that there are required wider setbacks.