# How much is 100 sq ft shingles?

Table of Contents

## How much is 100 sq ft shingles?

Shingle Roof Cost For a single square of roofing (100 square feet), the average price is $170 to $400.

## How many square feet does 1 bundle of shingles cover?

Before you make a decision on how many bundles of shingles to buy, you’ll need to learn a little roofing lingo. In the roofing industry, squares refer to 100-foot portions of roofing. A single bundle of shingles usually contains enough to cover 33 square feet.

## How big is one bundle of asphalt shingle?

3 bundles per square. (100 Sq Ft) 21 shingles per bundle. 33 square feet per bundle 100 square feet per square, 4 nails per Shingle

## How big is a square foot of shingle?

33 square feet per bundle 100 square feet per square, 4 nails per Shingle 31 Holes In One Back To AnyCalculator.com FineTunedUniverse.com

## How does the asphalt shingle roof calculator work?

This calculator is designed for a standard two sided sloped roof. The measurements entered represent a rectangle, of roof on one side of the building, The calculator uses these measurements to compute the area of the whole roof, and determine the number of bundles. Be sure to add a couple of bundles for double first row, and capping.

## How much waste shingles can I use on my roof?

Some of the cutoffs will be big enough to use as starter shingles or in other areas where cut shingles are needed, but smaller cutoffs will be waste. Waste can vary from 1-5% depending on the complexity of the roof.

## How much does a square of asphalt shingles cost?

A square is equal to 100 square feet and will cost anywhere between $100 and $1,800. A bundle is around 1/3 of a square and costs an average between $30 and $600. On the low end, asphalt averages $100 and $150 per square while slate averages over $1,000. Asphalt architectural shingles cost between $100 and $150 per square, $30 to $50 per bundle.

## How big does a square of roof shingles need to be?

A square of shingles is the quantity needed to cover 100 sq. ft. of roof. Shingles are packaged in paper- or plastic-wrapped bundles designed to be light enough for a person to carry, so heavier shingles require more bundles per square.

3 bundles per square. (100 Sq Ft) 21 shingles per bundle. 33 square feet per bundle 100 square feet per square, 4 nails per Shingle

## How many square feet of roofing do I Need?

Roof surfaces are measured in “squares.”. A square is an area of roof which measures 100 square feet. To determine the number of squares on the gable roof above, simply divide its total of 24,000 square feet by 100. The result is 240, and this means you would need 240 squares of shingles to cover that roof.