# How tall is the average doorway?

Table of Contents

## How tall is the average doorway?

80 inches tall

One of the most common front door sizes in American houses is 36 inches wide by 80 inches tall, and almost 2 inches thick. However, not all doors will have these measurements. Doors can be as narrow as 30 inches and as tall as 96 inches, and thickness can depend on the door material.

## How high is a doorway in feet?

The standard height for both exterior and interior doorways is 80 inches. In the construction industry, this is often stated as 6/8, which means 6 feet 8 inches. Although this height is standard, actual door openings are sometimes slightly smaller or larger, such as 79 or 81 inches.

## How high is a normal internal door?

6ft 6in

The most common interior door size by far, the one that was used by the majority of builders over the last few decades, is 762mm x 1981mm. This equates to a standard internal door width of 2ft 6in and a standard height of 6ft 6in.

## What is a standard door thickness?

1 ⅜ inches

The standard door thickness for interior doors is 1 ⅜ inches, though if your interior door is taller than 80 inches or wider than 36 inches, the recommended thickness by building codes increases to 1 ¾ inches. Closet doors are narrower and aren’t required to meet the standard interior door building codes.

## How tall is the average doorway in a house?

The standard height for both exterior and interior doorways is 80 inches. In the construction industry, this is often stated as 6/8, which means 6 feet 8 inches. Although this height is standard,…

## What’s the standard height for a front door?

Standard doors come in either wood vinyl, steel, or aluminum materials. To learn about the standard door heights: Pre-hung standard doors are doors that are already installed in a hinge at the door jamb and secured to the bottom of the door by a special hardware called a shingle.

## How tall is the rough opening for a door?

The height of common doors is 6 feet 8 inches. The standard height of the rough opening for a door is the door height plus 2 5/8 inches. The additional room allows for a 3/4-inch top jamb, a shim space above the door jamb and the thickness of underlayment and finish flooring.

## What are the dimensions of a passage door?

The height for all passage doors must be a minimum of 80 inches and the standard width sizes for interior doors are 24”, 28”, 30”, 32” and 36”.

## What is the average height of an interior door?

The standard height for both exterior and interior doorways is 80 inches. In the construction industry, this is often stated as 6/8, which means 6 feet 8 inches. Although this height is standard, actual door openings are sometimes slightly smaller or larger, such as 79 or 81 inches.

## What is an average size for an entry door?

Entry doors are usually 36 inches wide. While a door width of 36 inches is oversized for an interior door, it’s the standard size for front doors. The standard height remains the same, however, at…

## What is the size of a normal door?

The standard size is 6 feet 8 inches high by 6 feet wide, but other common sizes include 5 feet high by 8 feet wide and 8 feet high by 8 feet wide. Door sizes may also vary depending on the manufacturer.

## What is the standard door size for residential homes?

32 inches is the universally accepted standard home door width for the residential setting. It applies whether it is for the front door or the bedroom door. – Standard office door width. In this case, you have three options; 32 inches, 34 inches or 38 inches.