How to add a garage to an existing structure?

How to Add a Garage to an Existing Structure Step 1. Ask a master carpenter to help you evaluate the house or building already in place. Measure the space you have… Step 2. Acquire a building permit and list of building codes for a garage addition. Engage workers to dig footings for… Step 3. …

Do you need to frame an addition to your home?

Putting an addition on your home begins with the framing process. If you’re going to build the addition yourself, these steps will help you get the framing done right. You must meet a variety of local legal requirements and obtain building permits before you begin work on your addition.

How big is a second story addition above a garage?

Despite the overall complexity, one of the simplest second story additions is to add new living space above an existing garage. Most 2-car garages in our area are roughly 440 to 500 square feet.

Can a bedroom be added above a garage?

Sometimes space in an existing bedroom or even a bathroom has to be sacrificed to create access into the new addition above the garage. Contrary to that scenario there are some homes that only require a minor change to the interior such as removing a closet at the end of a hall to access the new space.

How do I build an addition to my garage?

Garage additions usually require a building permit. Contact your local building department to see what’s needed. Make sure to call 811 a few days before you dig the footing holes to have underground utilities located and marked. Frame the sides of the opening and install the new header. Then support the header with double trimmers on each end.

What kind of drywall do you need to add above a garage?

For example, building code requires 5/8-inch-thick fire-rated drywall, known as Type X, on the garage ceiling and walls when an addition is put on above. This drywall helps to protect the framing against the possibility of fire. In addition, penetrations in the drywall, for electrical conduit and the like, must be sealed tightly.

How do you knock out a garage wall?

Knock out the wall to create the new opening. First cut the sheathing and bottom plate along the framed opening. Then cut the wall into sections and push them out. If you have vinyl, aluminum or steel siding, it’s probably easier to remove it from the entire garage wall and reinstall it after the addition is built.