How wide is the average kitchen drawer?

Wall Cabinet Height Height tends to be limited since the cabinets need to fit between the counter and the ceiling. Common wall cabinet heights are 12, 36, and 42 inches. In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits.

What is standard drawer size?

Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less.

Is a 36 inch drawer too big?

A deep, wide drawer does have a limit in size. You just can’t do a wide drawer at 36” wide or more, because it will sag over time, even with heavy duty glides. Homeowners might tend to weigh down that drawer with big, heavy items and you have to account for that happening somewhat.

How big should a cutlery drawer be?

How big should my cutlery drawer be? Most standard cutlery trays aren’t very wide. Eating utensils are used on a daily basis, but they really don’t need much space. A drawer of between 25 – 30cm is the ideal size for your cutlery items without having to share space with wooden spoons and whisks.

How deep should a kitchen drawer be?

The standard depth is 12 inches, but you can find other sizes, from 15 to 36 inches.

How big is too big for a kitchen drawer?

The rule of thumb is 1.5 times the length of the drawer slide. If you have a standard depth kitchen cabinet then the normal length of drawer slide is 22”. If you multiply 22” x 1.5 = 33”. You can go wider, but the wider you go the more chance that the slide will not pull out as smoothly as you hope or expect.

How deep should my kitchen drawers be?

How deep are normal kitchen drawers?

How thick should drawer slides be?

When sizing drawer slides, check thickness of the assembly, as well as width and length. If the slide is too thin for your cabinet assembly, you’ll have to shim. If it’s too thick, it cannot be used. Light duty slides might be as thin as 1/2″, while heavy duty slides may be over 3/4″ thick.