Is Behr Wet-Look sealer slippery when wet?

CAUTION: Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Apply in sections so wet material does not have to be walked on during application.

How long does Behr sealer take to dry?

1 hour
The sealer will dry to the touch in 1 hour. Allow the first coat to dry for 4 hrs. before deciding if a second coat is needed.

What Is The Best Wet Look concrete sealer?

The two best products for a wet look are the Armor AR350 and the Armor AR500. Both types of acrylic sealers are made from high quality U.S. resins and are designed to enhance and protect the surface of the concrete.

Is Behr wet look sealer water based or solvent based?

BEHR PREMIUM Wet-Look Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to seal, protect and beautify concrete and masonry surfaces with a high gloss finish.

What is the best brick sealer?

Unless you want to purposely change the appearance, the best sealer for brick walls is a non-gloss penetrating clear sealer. A siloxane-based formula like Masonry Saver Water Repellent or SuperSeal-M will penetrate deeply into most masonry brick walls for optimal protection.

What is the best wet look patio sealer?

Best Paver Sealers for a Wet Look

Wet Look Natural Stone Sealer by Black Diamond.
Endura Seal 100% Acrylic “Wet Look” Semi-Gloss Concrete Sealer.
DuPont Premium High Gloss Color Enriching Sealer.
Armor AR350 Solvent-Based Acrylic Wet Look Concrete Sealer and Paver Sealer.
Eagle Sealer EPS5 Clear Paver Sealer.

What kind of sealer is Behr low lustre?

BEHR Low-Lustre Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to seal, protect and beautify concrete and masonry surfaces with a low-gloss finish.

How to contact Behr process Corporation for warranty?

For warranty information on this product, please call Behr Process Corporation at 1-800-661-1591. Concrete, Brick & Tile Wet-Look Sealer, Low-Gloss – 3.79L BEHR Low-Lustre Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer.

Can you use Behr wet look on brick?

“Never apply the Behr Wet Look directly to stone, brick or tile. (It says so in the instructions) You have to start by using a penetrating sealer, preferably a water based one such as Behr 98001. Confusingly they call it a Protector & Sealer but its really a penetrating sealer.

The BEHR Premium Low-Lustre Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to seal, protect and beautify concrete and masonry surfaces with a low gloss finish. The BEHR Premium Low-Lustre Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer.

What is the spread rate for Behr sealer?

Apply a thin coat using a nylon/polyester brush, 1/4” – 3/8” nap roller, high quality pad applicator or a high quality pump sprayer with an adjustable tip at a spread rate of 200-450 sq. ft. (19-42 m 2) per gallon. Spread rate is highly dependent on surface roughness and porosity.

How to apply low lustre sealer for concrete?

How long to dry Behr wet look sealer?

Longer dry time required in cooler temperatures and higher humidity. Allow to dry 24 hours for light foot traffic. 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days. Clean with a mild, non-abrasive liquid detergent after 30 days. Properly dispose of all soiled rags.