Is the Rinnai Royale inbuilt ETR a good fire?

(Rinnai nice – AGL Caringbah not) This is a good looking fire, and good heat production. The fan is automatic and cannot be turned off -ever. The noise is unbearable (for us) and although we have had the heater for a month it is unlivable (for us).

How much gas does a Rinnai ETR heater burn?

For 6 hours at high fire 35 x 6 = 210 MJ. Usually work on 50.4 Mj/kg so 4.17 kg is consumed. For 6 hours at low fire 8 x 6 = 48 Mj, so 0.95 kg is consumed. Why is there no gas coming out of my Rinnai ETR frame fire heater.

What is the error code on the Rinnai Royale gas log?

I have a Rinnai Royale ETR Gas Log Fire (NG) purchased and installed new in September 2006. Ever since it continues to go out and displays Error Codes 11 or 12 (mostly 12).

Is the Rinnai flame fire Royal FS35 working?

I have a Rinnai flame fire freestanding royal fs35, was working ok, now I light it , after a little while it just drops out , then it just wont relight , the pilot lights up ok but the main flame wont take ahold ??? Since the day our Rinnai Royale Freestanding Heater was installed we have had that problem plus many others (mainly faults 11 and 12).

How tall is the Rinnai Royale gas log fire?

Gas Log Flame Fires – Rinnai Royale Inbuilt ETR Gas Log Flame Fire Type Gas log flame Installation In built Finish Black Depth 405 Height 595-675

How to install a Rinnai flame fire heater?

Assemble and connect flue in accordance with the Rinnai Flueing Installation manual for Rinnai Flame Fire heaters. 3. For pipe sizing, refer to your local gas installation codes. Note: When first lighting the heater, the logs need to be burnt in, which may take approximately 2 hours. The flame colour may change after the initial burning in period.

Why is my Rinnai Royale ETR error code 11?

Rinnai said there is no charge and it took ‘Mr Rinnai’ about 2 hours to fix it. Well, ever since he fixed it, it has been a bit hard to start and now we get an ERROR CODE 11 come up. At least its a bit of a change. Front pilot will light but back one won’t so it sparks for 15 seconds then stops. Rang Rinnai again.