Is the Uniden BC355N scanner digital or analog?

Is the Uniden BC355N scanner digital or analog?

(PLEASE NOTE: The Uniden Bearcat scanner model BC355N can only pick up analog transmissions. If you live in an area where trunking or digital radio systems are used, you need to upgrade to the Uniden model BCD996P2 – the “D” stands for digital).

Can you scan 800 MHz?

Scanning Tips for 800MHz. First off, you need to use a scanner with full 800 MHz coverage. Not only the full 800 MHz region itself, but the scanner must be capable of receiving the scanning steps peculiar to the 800 MHz region, such as 30 khz steps (scanning increments) or the 12.5 khz steps as well.

How do I reset my Uniden bc355n scanner?

Reset Uniden Scanner

1. Turn the scanner OFF and unplug the audio cable from the rear of the scanner.
2. Press and hold the L/O and PROG buttons.
3. While holding L/O and PROG, turn the scanner on.
4. Release the L/O and PROG buttons.
5. Press the PD/FD/EMG button THREE times.
6. Press the AIR/MRN button THREE times.

How do I setup my Uniden scanner?

Programming a Handheld Model of the Uniden Bearcat Scanner

1. Ensure the battery is fully charged, or plug in the AC adapter.
2. Press the “Scan” button to put the handheld into scanning mode and press “Manual” to enter manual programming mode.
3. Enter the frequency you wish to store, using the numeric keypad.

Who uses 800MHz?

Public safety radio systems (such as those used by police, firefighters and emergency medical technicians) operate in several portions of the 800 MHz band, which consists of spectrum at 806-824 MHz paired with spectrum at 851-869 MHz.

What does 126 mean for cops?

Intercept suspects
Canada