What can dissolve polycarbonate?

Ethylene chloride, chloroform, tetrachloroethane, m-cresol, pyridine and other chemicals can cause partial dissolution of polycarbonate. Swelling agents include benzene, chlorobenzene, tetralin, acetone, ethyl acetate, acetonitrile and carbon tetrachloride.

Does toluene dissolve polycarbonate?

Moreover, they dissolve easily in organic solvents like (toluene, dichloromethane, formamide (DMF), tetrahydrofuran) [20]. Although these properties, PC surface exhibits low water CA (~84°) [21].

Is acetone safe on polycarbonate?

Acetone (commonly used as nail polish remover) is one of the chemicals you definitely need to keep away from your Smooth Operator. Acetone can weaken polycarbonate on contact to the point it will snap easily by hand. The polycarbonate is only weak when there is still liquid acetone in contact with it.

Does acetone melt Lexan?

Never use aromatic or halogenated solvents like toluene, benzene, gasoline, acetone or carbon tetrachloride on Lexan polycarbonate materials. Contact with harsh solvents such as methyl ethyl ketone (MEK) or hydrochloric acid can result in surface degradation and possible crazing of Lexan sheet.

Does isopropyl alcohol affect polycarbonate?

Other chemicals such as Isopropyl Alcohol and Ethanol have very little effect on the surface of the Polycarbonate. We even recommend that our anti-reflective coatings be sprayed with a 70% Isopropyl Alcohol solution to remove fingerprints.

What chemicals affect polycarbonate?

Ethylene chloride, chloroform, tetrachloroethane & other chemicals can cause partial dissolution of Polycarbonate. Chemicals such as benzene, acetone, ethyl acetate & tetrachloride may cause Polycarbonate to swell. In addition chemical attack can include colour change & whitening.

Does alcohol dissolve polycarbonate?

Polycarbonate will scratch, so only use a clean (preferably new) cloth. Solvents: Polycarbonate is damaged by some common household solvents including Lysol, Pinesol and Isopropanol alcohol. In fact, you should avoid any of the stronger chemical based cleaning solutions to be safe.

Does isopropyl alcohol degrade polycarbonate?

In broad terms there are some chemicals that very aggressively attack Polycarbonate. These chemicals include Toluene, Benzene, Acetone and Ammonia to name a few. Other chemicals such as Isopropyl Alcohol and Ethanol have very little effect on the surface of the Polycarbonate.

Can I use mineral spirits on Lexan?

Will this damage the lexan? Mineral spirits isnt working. The citrisgel stuff turns into a thick gunky wax.

Which is the best chemical to use in polycarbonate?

Polycarbonate Chemical Compatibility Chart Chemical Compatibility Acetaldehyde C 1 -Fair Acetamide D-Severe Effect Acetate Solvent N/A Acetic Acid B 1 -Good

Which is the best solvent to dissolve plastics?

Diethyl Ether will dissolve 6 out of 8 and Benzine will dissolve 6 of 8 but 2 will dissolve just a bit over time. This chart clearly and easily tells you your answer. Find out the type of plastic you want to dissolve….then use this chart to find the solvent you need. Cheers.

What kind of alcohol is not compatible with polycarbonate?

NOT compatible with methyl alcohol, acetone, ketones, ethers, aromatic and chlorinated hydrocarbons, aqueous or alcoholic alkaline solutions, or ammonia gas Polycarbonate Chemical Compatibility Chart: Check the chemical compatibility of Polycarbonate with various chemicals, solvents, alcohols and other products.

How to check the chemical compatibility of polycarbonate?

Polycarbonate Chemical Compatibility Chart: Check the chemical compatibility of Polycarbonate with various chemicals, solvents, alcohols and other products. Please Note: The information in this chart has been supplied by reputable sources and is to be used ONLY as a guide in selecting equipment for appropriate chemical compatibility.

What’s the best solvent to dissolve polycarbonate in?

Any way, this may be of your help: PC could be dissolved in Cyclopentanone (commercially available as thinner for negative tone photo-resist SU-8) in order to obtain a liquid solution to produce thin film by spin coating. Two good solvents for polycarbonate are dimethylformamide and 1,4-dioxane (often just named dioxane).

Which is the best solvent to dissolve an ABS polymer?

Regardless, 2-Butanone = MEK and is a cousin of the Butadiene linkage that holds the ABS polymer together. Acetone acts as a polar protic solvent that can generally solvate a wide variety of polymers. Both of these solvents can make a dilute ABS solution that can use the intermolecular forces to bond the plastic polymer to the glass.

What kind of solvent can I use to dissolve glass?

Both of these solvents can make a dilute ABS solution that can use the intermolecular forces to bond the plastic polymer to the glass. Intermolecular forces are what geckos use to run on glass, teflon, or any surface.