What can I do if my sound is not working on my DVR?

Try tightening the cable connection or using a different cable. Change the channel. Changing channels helps to match up the audio sound and video. Rewind the program you’re watching. If you have a DVR, go back a few seconds, then fast-forward to return to the live broadcast.

What to do when your AV receiver is not working?

Under Settings, select Audio Settings. In the Audio Settings, select TV Speakers. Under the TV Speakers, select Audio System. If still sound is not heard after adjusting all these settings, set the Input Mode of the AV receiver to Auto. For other audio related issues, use the information listed below:

What should I do if my sound is not working on my direct TV?

Change the channel. Changing channels helps to match up the audio sound and video. Rewind the program you’re watching. If you have a DVR, go back a few seconds, then fast-forward to return to the live broadcast. Using surround sound? Try using the TV speakers only to test if the surround sound system is causing the issue.

What to do if your DVR says hard drive is missing?

Confirm that the DVR recorder is in fact recording video by going to the video search menu and confirming there is video being stored for your cameras. If the Hard Drive status window shows the drive (s) as being absent, or continues to display and Error status, that hard drive will need to be replaced.

What should I do if my DVR is not working?

Audio-capable cameras or self-powered microphones are required to use audio functionality. DVR channels have not been enabled for audio. Check your Instruction Manual for details on enabling audio channels. Audio cables are loose or have become disconnected. Check all audio connections on the system and monitor / TV.

How do I enable audio on my DVR?

Enabling audio on your DVR or NVR Step 1) Select Main Menu Step 2) Select option for Camera Step 3) Select Encode from the left hand menu, and the top tab Step 4) Select check box for Audio Video for Main Stream Step 5) Select Audio Video Recording checkboxes for Extra Stream Step 6) Enable Audio Source For HDCVI Cameras

What should I do if my DVR is stalling?

If the DVR is stalling during this phase it could indicate a problem with the hard drive When the DVR is powered down, Remove the cover from the DVR. Inside the DVR you will find 2 main components, One is the Motherboard, the other is the SATA Hard drive. (See image below).

How to enable overwrite on a DVR camera?

Check your Instruction Manual for details on enabling overwrite. You must format the hard drive using the system before it will record. Check your Instruction Manual for details on formatting the hard drive. NOTE – Formatting the hard drive will erase all data saved on the hard drive. Camera cables are loose or have become disconnected.