What do you need to know about fabric covering process?
What do you need to know about fabric covering process?
Signatures are required in the aircraft logbook. To ensure work progresses as required, the IA should be involved from the beginning, as well as at various stages throughout the process. This page describes steps common to various STC and manufacturer covering processes, as well as the differences of some processes.
How do you remove fabric covering from aircraft?
Good ventilation is needed for all of the processes. Removal of the old covering is the first step in replacing an aircraft fabric covering. Cut away the old fabric from the airframe with razor blades or utility knife. Care should be taken to ensure that no damage is done to the airframe.
How to replace a leaf or spine switch in ACI fabric?
In the ACI GUI, Navigate to Fabric -> Inventory -> Fabric Membership, identify the switch to be replaced. In this example, I will be replacing leaf 103. 2. Right click on the switch to be replaced and Decommission the switch.
How to replace a switch in ACI fabric-Cisco?
Right click on the switch to be replaced and Decommission the switch. Now a new pop up windows will open as shown in image below. Click on “Remove from Controller” and hit Submit. Now another pop-up window will appear to confirm the decommission process.
What’s the best way to repair a tear in fabric?
The method of fabric repair depends on the size of the damaged area. You can repair small areas with a patch, but large tears or rips require sewing the fabric.
Good ventilation is needed for all of the processes. Removal of the old covering is the first step in replacing an aircraft fabric covering. Cut away the old fabric from the airframe with razor blades or utility knife. Care should be taken to ensure that no damage is done to the airframe.
Signatures are required in the aircraft logbook. To ensure work progresses as required, the IA should be involved from the beginning, as well as at various stages throughout the process. This page describes steps common to various STC and manufacturer covering processes, as well as the differences of some processes.
What’s the best way to replace screen material?
Press the Spline into the Frame. Unspool a length of spline and install it by pressing it into the frame’s groove using a rolling spline-tool (Image 1). Gently pull the spline tight with one hand as you carefully press it into the groove with the roller (Image 2). As the spline goes into the groove, it helps pull the screen taut.