What does backwash do on a pool pump?

Not exactly sure what that means? Well, as the name suggests, backwashing involves reversing the flow of water through your filter media, be it Zeoplus, sand, glass pearls or diatomaceous earth (DE). This dislodges dirt and debris that may have become trapped, and flushes it out through your multiport valve waste line.

What happens if I dont backwash?

Backwashing A Pool It reverses the flow in the filter and sends water out through the multiport valve waste line. Not backwashing your pool will result in a continuous rise of sand in the water, and flow will continue to go down. With this, some filter pumps could explode and result from closing call injuries.

What happens when you backwash a pool pump?

The process of backwashing dislodges trapped debris and contaminants, flushing them out through your value’s waste line or a hose that is connected to the pool pump. When the filter media is clean, the pressure gauge is lower and water can easily flow in and out of the system. How often should you backwash your pool?

How to backwash a pool sand filter pump?

How do you backwash a sand filter pump? 1 Turn off the pool pump. 2 Set the filter valve handle to the BACKWASH pool position and ensure the handle locks in place. 3 Turn on the pump and backwash for 2 minutes or until the water in the sight glass (located on the filter) is running clear. 4 Turn Off the Pump.

Do you put the vacuum on waste or backwash?

With a sand pump for an above-ground pool, when hooking up the hoses to vacuum the pool, do I put it on backwash to vacuum, or on the filter setting? Community Answer Use the filter setting, or you can vacuum to waste, which means the water is discharged out instead of returning to the pool.

Do you turn off the pool pump after vacuuming?

If you haven’t already done this after vacuuming the pool, then turn off the pool pump. You should do this every time before you change the setting on the multiport valve as it you do not and leave the pump running it could damage the system. Push the handle down to release the bottom from the current position.