What does code P1111?

P1111 is not a fault code. It is a special designator Jaguar uses meaning system ready, drive cycles completed after the last fault event. P1000, on the other hand, means system not ready, or drive cycles not completed after the last recorded fault event.

What is Engine code P1136?

P1136 is Long Term Fuel Trim Add.Fuel,Bank1 System too Lean. This is likely caused by a leak in manifold vacuum.

How do I fix code P1000?

In order to clear a P1000 trouble code the vehicle must be driven through a Drive Cycle until all monitors are completed or in ready status.

What are the symptoms of a bad variable valve timing solenoid?

Bad Oil Control Valve (VVT Solenoid) Symptoms

Indicating Check Engine Light.
Rough Idling.
Rough Acceleration.
Increased Fuel Consumption.
Low Engine Performance.

Is P0021 serious?

How Serious Is Code P0021? – Severe. This trouble code severely impacts the drivability of your vehicle. The most common problems consist of increased engine stalling, engine rough idle, lowered fuel economy and rattling/knocking noises from the engine.

What does camshaft position Timing Over Advanced mean?

The camshaft is too advanced when the ECM has commanded the camshaft to retard to a lower timing level. The oil is too thick causing the passages to become clogged due to lack of oil flow to and from the camshaft phasers. The camshaft phasers are stuck in the advanced position.

How do I fix code P0136?

What repairs can fix the P0136 code?

Replacing the O2 sensor for bank 1 sensor 2.
Repairing or replacing the wiring or connection to the O2 sensor for bank 1 sensor 2.
Repairing exhaust leaks or a damaged catalyst.

Is P1000 code bad?

Therefore, the OBD-II scanner error code P1000 problem is not really a problem at all. While it does indicate that some diagnostic testing was not completed, it does not impede your ability to drive your vehicle. In fact, this error code should resolve itself with regular driving.

What code is P1000 on a Ford f150?

The Ford F-150’s P1000 code is indicated when an OBDII diagnostic scanner is unable to detect error codes due to a malfunction. Usually the scanner displays this message when a vehicle is factory new or the Powertrain Control Module (PCM) or battery has been disconnected.

What does code p1211 mean and what does it control?

P1211 Meaning The Powertrain Control Module (PCM) monitors the Injection Control System Pressure. The Diagnostic Trouble Code (DTC) indicates that Injection Control Pressure (ICP) was not to specification during normal driving conditions.

What does code p1145 mean?

Brief explanation of the P1145 code and definition of P1145 is the bottom side. P1145 Meaning : MFG – Manufacturer Specific codes, which have a ‘1’ as their second digit to indicate they are unique to a particular vehicle make or model.

What does engine code po2111 mean?

Engine Light ON (or Service Engine Soon Warning Light) P2111 FORD Meaning The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline.