What does e3 mean on glucose meter?
What does e3 mean on glucose meter?
“E-3” in the display means your blood glucose may be extremely high or a meter or a test strip error has occurred.
Why is my glucometer showing error?
“Err” in the display with a flashing test strip means your blood sugar may be extremely low, or the test strip may be damaged or not properly inserted. If you see this error message after you applied blood to the test strip, refer to Chapter 3, “Unusual Test Results”, in your owner’s booklet.
What is error 3 in Accu Chek instant s?
In rare cases, an E-3 error code may indicate that your blood glucose is extremely high and above the system’s measuring range. If you do not feel like your blood glucose is extremely high, repeat the blood glucose test. See the Unusual Blood Glucose Results section in the chapter Blood Glucose Tests.
What does e5 mean on a glucose meter?
“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care.
What does e1 mean on Accu Chek?
“E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.
What does e9 mean on a glucose meter?
“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter.
What is error E 1 on Accu-Chek Active?
What does err 3 mean?
Error Code 3 is a Windows error code that appears when the computer cannot find the specified path. This can occur for a number of reasons, including a loss of connectivity to a network location. In both situations, the error is the same: the computer could not find the path to the file.
What does E 9 mean on a glucose meter?
What is E 1 in Accu-Chek?
What is E 9 on Accu check?
How do I know if my truetrack test results are accurate?
• Check Codes. Code in Meter Display must match Code on vial of TRUEtrack Test Strips being used and Code Number printed on Code Chip. • Meter displays results as plasma values. Page 8 Results from TRUEtrack are considered accurate if within +/– 20% of lab results.
How to test glucose control with truetrack meter?
Page 21 How to Test Glucose Control Use ONLY TRUEcontrol Glucose Control Solution with the TRUEtrack Meter 1. Wash hands with soap and water, dry thoroughly. Allow Control, vial of Test Strips and Meter to adjust to room temperature (68-77°F). Write date first opened on Control Label and/or Test Strip vial label.
What does out of range mean on truetrack?
System Out of Range Warning Messages CAUTION! TRUEtrack measures blood glucose results from 20-600 mg/dL. If blood glucose result is less than 20 mg/dL, “Lo” appears in Meter Display. If blood glucose result is greater than 600 mg/dL, “Hi” appears in Meter Display.
What are truetruetrack® test strips?
TRUEtrack ® Test Strips TRUEtrack® test strips feature our patented TRUEfill® technology with a beveled tip allowing for greater sampling precision and first-test success.