What does no water flow sensor mean?
What does no water flow sensor mean?
Usually the error is caused by priming (pump has been running too long and no water has flowed) but other times it’s not enough RPM to trip the sensor. According to the manual “If no flow is detected for more than 20 minutes, the OmniLogic will shut down the pool pump and will indicate an error.
Why is the no flow light always on?
The NO FLOW LIGHT is always on and most of time also cell reversing light. There are no error codes. Today pool company said the cell may be bad. I called handy to get info and they said possibly its a bad sensor. Do you this think this will fix it? I also had yellow mold but used algaecide and extra chlorine which got rid of it.
What does the no flow light on TFP mean?
The no-flow light really has nothing to do with the cell directly. There is a flow switch that makes sure water is flowing before the cell will turn on and seeing the no-flow light means that the switch isn’t seeing a flow. It’s either defective or the screen is clogged and not allowing enough water to pass through. Welcome to TFP!!
Why is there no flow light on my cell phone?
The no-flow light really has nothing to do with the cell directly. There is a flow switch that makes sure water is flowing before the cell will turn on and seeing the no-flow light means that the switch isn’t seeing a flow. It’s either defective or the screen is clogged and not allowing enough water to pass through.
Why does my check system say no flow?
My check system light is on and despite adding a lot of salt my reading is still saying very low salt and stuck at 2200 ppm. The system is saying NO FLOW and Chlorinator is off despite being set at 95% and super chlorinate activated – It is as if my system is not recognizing the new cell was installed.
The NO FLOW LIGHT is always on and most of time also cell reversing light. There are no error codes. Today pool company said the cell may be bad. I called handy to get info and they said possibly its a bad sensor. Do you this think this will fix it? I also had yellow mold but used algaecide and extra chlorine which got rid of it.
The no-flow light really has nothing to do with the cell directly. There is a flow switch that makes sure water is flowing before the cell will turn on and seeing the no-flow light means that the switch isn’t seeing a flow. It’s either defective or the screen is clogged and not allowing enough water to pass through. Welcome to TFP!!
What does it mean when your pool has no flow?
No flow errors are either insufficient water flow, or a disconnected sensor, or a bad sensor. Start by checking the skimmer basket, pump strainer basket, and cleaning/backwashing the filter. If that doesn’t do it, take a look at the sensor cable and make sure it is properly connected and not cut anywhere.
The no-flow light really has nothing to do with the cell directly. There is a flow switch that makes sure water is flowing before the cell will turn on and seeing the no-flow light means that the switch isn’t seeing a flow. It’s either defective or the screen is clogged and not allowing enough water to pass through.