What does the lock button mean on garage door opener?

What does the lock button mean on garage door opener?

The Lock button turns the Lock feature on/off. This feature is designed to prevent operation of the door from hand-held remote controls. However, the door will still open and close from the Push bar and the Keyless Entry.

How do I reengage my garage door lock?

Below are some simple instructions so you know exactly how to quickly reset your garage door.

1. Door Must Be in Down Position.
2. Pull the Emergency Release Cord.
3. Manually Move the Garage Door and Return to Down Position.
4. Pull the Emergency Release Cord Toward the Door.
5. Re-connect the Trolley to the Opener Carriage.

Can you lock garage door with myQ?

Take advantage of advanced security features* like automatic garage door locks, battery backup and the ability to close your door from anywhere with myQ.

Why is my garage door not locking?

Adjust the lock bar to get your garage door to lock properly. If you have difficulty locking the door, it is most likely due to the locking bars not lining up with the locking holes in the door track. The locking bars attach to a disk on the inside of the door lock and stretch across the width of the door.

How do you turn on the lock button on a garage door?

If you have a 3-button wall panel (push-button, light, & lock) you simply push & hold the lock (padlock symbol) button for approx 10 seconds until the LED quits flashing. Therefore if someone pushes & holds the lock button by mistake while trying to open the door this function will be turned on.

How to unlock your garage door opener wall control unit?

http://PrecisionDoor.net put together a quick tutorial on on how your garage door opener wall control unit works and some additional features, including the vacation button. If your garage door opener is locked, check the wall control, it may be set to vacation mode. Loading…

What happens to the wall button on a garage door opener?

When the garage door opener is “locked-out” the transmitters will be disabled from opening the door but the wall button will still function as usual. Some older openers used to have a vacation switch for this purpose & this is just the newer version of that same operation.

Why do I need a lock on my garage door opener?

The purpose of the lock feature on the garage door opener is to prevent the remote control from opening and closing the garage door while still allows the door control from opening and closing the garage door. When your house is empty or whether you are away on vacation, this feature gives you an added peace of mind.

If you have a 3-button wall panel (push-button, light, & lock) you simply push & hold the lock (padlock symbol) button for approx 10 seconds until the LED quits flashing. Therefore if someone pushes & holds the lock button by mistake while trying to open the door this function will be turned on.

Can a lock button be activated on a door?

With the LOCK button activated, the receiver logic board will NOT accept signals from the remote control. The door will, however, open and close by activating the push bar, key switch or keypad. Check for a blinking light on the multi-function door control panel.

What does lock button do on Craftsman garage door opener?

Lock button This feature is designed to prevent operation of the door from hand-held remote controls. However, the door will still open and close from the Push bar and the Keyless Entry. To activate: Press and hold the Lock button for 2 seconds.

Where is the lock button on a door opener?

The LOCK Button is ON The Multi-Function Door Control Panel includes a LOCK button. With this feature, the indicator light behind the push bar will flash when the lock switch is turned ON and when you press the remote control the light bulb on the opener will flash two times.