What does the reset filter light mean on my GE microwave?

The light is letting you know to clean the filter below the microwave. Once you have cleaned it, you can reset the the light by pressing and holding the the reset filter button for 5 seconds. The charcoal filter is located just behind the grill at the top of the microwave.

What does the defrost symbol look like on a microwave?

Usually the defrosting symbol on the microwave oven’s control panel is a snowflake or a snowflake with a drop. If you are in doubt whether your microwave oven has a defrosting function, consult the instruction manual.

When do I need to reset the charcoal filter on my ge microwave?

Over-the-Range Microwave – Charcoal Filter Reset Won’t Turn Off. GE and GE Profile over-the-range microwaves with an “Upfront Filter” have a Reset Filter notification light on the control panel to indicate when it is time to change the filter. The Reset Filter reminder will light every 6 months.

How do you reset the filter on a microwave?

Open the microwave door and press the access panel above the cavity opening where it says “PUSH” to lower the panel door. Models with an Upfront Filter have a Reset Filter notification light on the control panel to indicate when it is time to change the filter.

How does the reset filter notification light work?

Models with an Upfront Filter have a Reset Filter notification light on the control panel to indicate when it is time to change the filter. The light will illuminate after approximately 6 months of use to alert user to replace the charcoal filter (if used) and clean/replace the grease filters. Reset by pushing and hold 3 seconds.

What to do if your microwave does not turn on?

For this reason, everything else may appear in working order but the microwave will not begin heating. As you will be testing electrical components, verify that you have unplugged your microwave before beginning. Locate and remove the door switch. You will need to remove the cabinet in order to access it.

How do you reset a GE Profile microwave?

Perform a hard reset. Pull the plug out of the wall power supply, and wait a moment. Plug the GE microwave back into the wall power supply to reset any anomalies with the microwave’s memory. You will need to reset the time of day if you perform a hard reset.

How do you reset the water filter on a GE refrigerator?

Reset GE and Hotpoint Refrigerator Filter Change Filter Light: For GE and Hotpoint refrigerators press and hold the reset water filter button on the dispenser for 3 seconds then release. If your system uses a color LED light, the light should have changed from red to green, indicating the filter reminder has been reset.

How do you reset the water filter light?

Resetting the Filter Light. The water filter warning light or message is reset by pressing the Ice & Water pad on the control panel for three seconds. The filter light should turn green, and the filter status will show Good. After resetting the light, run the water dispenser for three minutes to clear any air and contaminants from the water system.

How to reset a GE Spacemaker microwave?

Off” button on the front of the microwave.
Carefully pull the microwave away from the wall enough that you can reach the wall outlet.
Grasp the power cord at the base of the plug where the plug meets the wall outlet and pull it out of the wall outlet.