What happened to Eternal water heater?

After a year of trying to correct the problems, Grand Hall, the parent company of Eternal Water Heaters, ceased operations in North America leaving their customers without warranty coverage, part replacements and technical resources.

How do I reset my on demand water heater?

How do you reset a tankless gas water heater?

Locate the red reset button. There should be a red button in the center of the control panel.
Press the button firmly. The reset button can sometimes be sticky, especially if you haven’t reset the heater in a while.
Wait to hear the button click.

How do I reset my Whirlpool smart water heater?

Press the small reset button in the center of the thermal switch. If it’s tripped, you may be able to hear it click. Even if you do not hear the thermal switch click, try lighting the pilot using the instructions on the water heater’s label.

What year is my hot water tank?

Check the label Check for a manufacturer label on the side of your water heater — this should include the installation date. If the label is missing, or the installation date is not listed, you can use the serial number to determine the age of your unit.

Why is my gas hot water heater not working?

If a gas water heater isn’t heating, a common problem is usually that the pilot light has gone out. This may be caused by the gas valve, the natural gas supply, or—more likely—the thermocouple located next to the pilot light.

Is there such a thing as an eternal water heater?

Have an Eternal (GU100, GU145, GU195) Water Heater? The good news is that (apart from one key issue) this is a well designed Water Heater that, if looked after will last a long time. It’s primarily constructed from stainless steel and uses good quality components.

What to do if your eternal water heater floods?

With the valve out remove the two screws that hold the servo stepper motor in place. When the unit floods, the motor floods which is why you’re having issues. Gently crack the motor open by releasing the four tabs that hold everything in place. If you manage to keep all of these intact you’re a better man than I.

Is the Grand Hall eternal water heater good?

The good news is that (apart from one key issue) this is a well designed Water Heater that, if looked after will last a long time. It’s primarily constructed from stainless steel and uses good quality components. The bad news is that Grand Hall, the company that made and sold these heaters in the US has gone bankrupt.

What should I do if I get an E27 error?

Otherwise you’ll get another e27 error when the motor self tests. Once everything is in place, close the drain and air inlet valves. Open the inlet and outlet water valves. Open a faucett to allow air out of the system. Check for leaks, close up the unit and turn on gas and power.

Is the eternal tankless water heater going belly up?

This avoids the ~30 second lag other tankless water heaters need to heat the boiler before generating hot water. That’s the good news. The bad news: Both GU26’s developed boiler leaks, one in ~2 years, the other in ~4. The good news: Eternal replaced both GU26’s for free under warranty.

Can a eternal tankless be replaced for free?

The good news: Eternal replaced both GU26’s for free under warranty. The bad news: The replacements were a GU145S, with completely different dimensions. So all plumbing connections had to be moved: gas supply pipe, hot & cold water lines, TP relief line, vent pipe and condensate line.