What is a water heater disconnect?

The disconnecting means for a permanently connected water heater must comply with 422.31(B). This part requires a disconnecting means within sight of the water heater, or if more than 50 feet from the appliance, it must be capable of being locked in the off position.

Do water heaters need a disconnect?

According to the NEC an electric water heater does not require any disconnect other than a circuit breaker at the main panel or sub panel and it does not need to be insight.

Can a GFCI be used as a disconnect?

A GFCI needs to be labeled as a disconnecting means to be used as one. A normal receptacle or deadfront GFCI is not labeled or listed for disconnecting use — it won’t kill you for abusing it that way, but it could lead to some premature wear on the GFCI’s contacts, shortening its lifespan.

When was the state water heater company acquired?

State® was acquired by A.O. Smith® in 2001 1957 – Began making porcelainized glass-lined tanks (basic design feature still in use today) Support Us!

How do you disconnect an old hot water heater?

Once the old water heater is empty, disconnect the T&P Relief Valve. The T&P Relief Valve will be connected to your old water heater on the side, but near the top, and looks like a thin pipe. This pipe is connected to the water heater on one end, and hangs parallel to the water heater.

What makes a state hot water heater so good?

State. When it comes to building durability into a product, nobody does it like State. In fact, we’ve tested our water heaters in some of the most hostile environments and under the toughest conditions to make sure they last longer and provide many more years of hot water.

Who is the sponsor of the state water heater?

State Water Heaters has a long history of supporting NASCAR. The interactive website, www.stateracing.com, contains comprehensive coverage of the State racing sponsorship. Solid. State. When it comes to building durability into a product, nobody does it like State.

When do I need to disconnect my water heater?

It had been a common practice to not install a separate disconnect when a water heater is located in a basement and within sight of the circuit breaker panel. I will install a disconnect if not within sight of the circuit breaker panel.

How can I Reset my state water heater?

Disconnect the electrical supply to your State water heater. Make sure that all electricity to your water heater has been shut off before proceeding. Locate your State water heater’s control circuit panel. In most State water heater models, the control circuit panel looks like a rectangular metal box mounted to the side of the water heater.

Can You disconnect an electric water heater with a branch circuit?

(A) Rated at Not Over 300 Volt-Amperes or 1/8 Horsepower. For permanently connected appliances rated at not over 300 volt-amperes or 1/8 hp, the branch-circuit overcurrent device shall be permitted to serve as the disconnecting means. (B) Appliances Rated Over 300 Volt-Amperes or 1/8 Horsepower.

Where is the control panel on a state water heater?

Locate your State water heater’s control circuit panel. In most State water heater models, the control circuit panel looks like a rectangular metal box mounted to the side of the water heater. Use a screwdriver to remove the two screws that secure the door of the control circuit panel.